View Poll Results: What are your 5.4L swap plans?
Voters: 220. You may not vote on this poll
Anyone intrested in 5.4L swaps, in here. Need you to opine.
Everett is building a 4v 5.4 and is looking at B heads. I think you could maybe PM him about your heads and tell him I pointed you to him.
The intake clamshell should be able to be done with permatex (RTV). Always keep birdman941 in mind. He gets the aussie parts last I knew.
The intake clamshell should be able to be done with permatex (RTV). Always keep birdman941 in mind. He gets the aussie parts last I knew.
I figured RTV would be fine on the plenum, I can use a regular GT t/b gasket and I can probably use a 99-01 intake gasket. I need to pick up a coolant crossover and t-stat housing so I can get that whole assembly mocked up.
There's going to be some n00bs popping in asking questions. I've gotten a ton of PM's lately from several different guys starting various 5.4 swaps. Be gentle boys.
i won't be riding in mine for a while, still got a lot of suspension work, need a rear end, and a lot of body work before I'm ready to introduce her to the street again. Making <1000 a month makes it hard to finish up a car. I may be firing it up though lol.
finally got the break in the weather I needed. K-member is dropped and the headers are almost off. Almost. There's 1 nut holding one of them on and 3 holding the other. All are seemingly totally inaccessible but I'll finger out a way. I'm going to chop all the bits out of it that I think I can sell and call pick-n-pull to come get the carcass.
BTW, I'll be gone for a few days starting the day affa Christmas. So when people start badmouthing me for being unresponsive, tell them to **** off. I'm off pig huntin'.
BTW, I'll be gone for a few days starting the day affa Christmas. So when people start badmouthing me for being unresponsive, tell them to **** off. I'm off pig huntin'.
nice! Got to see you in this forum.
sounds great! Carcass? Lol dam. I know somebody should buy the shell for all out drag car? good luck on the hunt. merry Christmas everybody! Hope everybody has a stack of parts under the tree
finally got the break in the weather I needed. K-member is dropped and the headers are almost off. Almost. There's 1 nut holding one of them on and 3 holding the other. All are seemingly totally inaccessible but I'll finger out a way. I'm going to chop all the bits out of it that I think I can sell and call pick-n-pull to come get the carcass.
BTW, I'll be gone for a few days starting the day affa Christmas. So when people start badmouthing me for being unresponsive, tell them to **** off. I'm off pig huntin'.
BTW, I'll be gone for a few days starting the day affa Christmas. So when people start badmouthing me for being unresponsive, tell them to **** off. I'm off pig huntin'.
Hope everyone had a great Christmas. This thread has been very useful in terms of all the different configs on this motor. I'm still trying to decide which one I will use. I guess the only questions I have now pertain to swapping the 2V 5.4 into a 3V Mustang..
why would you put a 2v where there used to be a 3v? In that specific case, 4v is the more financially sensible option. Making a 2v work on a 05+ car would be a chore, mostly because of the drive by wire system and the fact that nothing transfers well.
Please give some more detail so the boys can be helpful. I'm gone for a few days starting... NOW!
Please give some more detail so the boys can be helpful. I'm gone for a few days starting... NOW!
just put a 5.4 block under the 3v.
That's what I would do.
I got my ported heads on the way and everett messaged me about my heads on corral and had me send him an invoice for a deposit on them until he can get the rest together. I need to reassemble them and get them packaged up now.
I'm in the market for cams now so I'm shopping around trying to find a good deal and then hopefully picking up an A-1000 pump for cheap from someone that says they can get me one. After that it's just a few bolts here and there, install the internals, an alternator, headers, and motor mounts and I'll be able to set it in place and fire this bitch up.
I got my ported heads on the way and everett messaged me about my heads on corral and had me send him an invoice for a deposit on them until he can get the rest together. I need to reassemble them and get them packaged up now.
I'm in the market for cams now so I'm shopping around trying to find a good deal and then hopefully picking up an A-1000 pump for cheap from someone that says they can get me one. After that it's just a few bolts here and there, install the internals, an alternator, headers, and motor mounts and I'll be able to set it in place and fire this bitch up.
Folks have asked me why put a 2V where the 3V used to be. I've tossed around alot of ideas as many of you have. I wanted something different. I've been running a 13PSI Whippled 3V for the past 3 years. Loved it but just wanted a change. I actually like the taller deck of the 5.4 and having the blower stand above the cowl area. I have a 3inch cowl hood for the build as well. I also thought about just running an adapter plate to raise the Whipple as well. Anyway, the Whipple is sold now and I have a complete Lightning motor. I also have an extra M122, TB and inlet tube in the garage. I am aware of the VooDoo adapter. So you guys would use the 3V heads on the 5.4 block. I'm looking at keeping the internals stock for now, now as far as running the OEM 3V heads, what else would I need for the top end? Would I be able to replace my 3V engine harness/ECU with a 2V harness/ECU and continue mission?
Last edited by 2blownstangs; 12-26-2010 at 11:17 AM.
FTP Headers.
I was wondering if anyone has been able to get in touch with TJ at FTPerformance since he moved into new shop. Trying to get in touch to purchase headers or get my name on a set when he makes another batch. Notdoing swap till spring. Just buying parts. Thanks guys.
so I've been coming into more money lately than expected, and my hours at work aren't getting cut so I'm starting to think I might fab up a mild little stealthy turbo kit and run really low boost to give myself a little extra kick. My fuel system can handle it so I don't see where there is any real issue. I'm looking around to see what I can come up with and if I can make it happen, I'm gonna do it.
My only issue is my compression, but at low boost and really conservative timing, we can make it work and I think 600 hp shouldn't be an issue.
My only issue is my compression, but at low boost and really conservative timing, we can make it work and I think 600 hp shouldn't be an issue.
so I've been coming into more money lately than expected, and my hours at work aren't getting cut so I'm starting to think I might fab up a mild little stealthy turbo kit and run really low boost to give myself a little extra kick. My fuel system can handle it so I don't see where there is any real issue. I'm looking around to see what I can come up with and if I can make it happen, I'm gonna do it.
My only issue is my compression, but at low boost and really conservative timing, we can make it work and I think 600 hp shouldn't be an issue.
My only issue is my compression, but at low boost and really conservative timing, we can make it work and I think 600 hp shouldn't be an issue.
i've been super busy the past month but tomarrow i'm gonna try to go up there and get with tj about the headers.
FTP
I know the filling myillwillinc. I have been pulling 60 hrs a week the past couple of weeks. School semester ended and work picked up. I can't complain as long as I have a job and get more hours. Thanks for the response. What ever you find out would be appreciated. Thanks
so I've been coming into more money lately than expected, and my hours at work aren't getting cut so I'm starting to think I might fab up a mild little stealthy turbo kit and run really low boost to give myself a little extra kick. My fuel system can handle it so I don't see where there is any real issue. I'm looking around to see what I can come up with and if I can make it happen, I'm gonna do it.
My only issue is my compression, but at low boost and really conservative timing, we can make it work and I think 600 hp shouldn't be an issue.
My only issue is my compression, but at low boost and really conservative timing, we can make it work and I think 600 hp shouldn't be an issue.
whats your CR going to be? if its high your just asking for trouble to try and get a power adder to make 600hp with i high CR. id start planning on what you want now before you shoot from the hip. if you want to go FI then swap the piston and just do it right the first time so you can enjoy it when its all done! JMO!
Folks have asked me why put a 2V where the 3V used to be. I've tossed around alot of ideas as many of you have. I wanted something different. I've been running a 13PSI Whippled 3V for the past 3 years. Loved it but just wanted a change. I actually like the taller deck of the 5.4 and having the blower stand above the cowl area. I have a 3inch cowl hood for the build as well. I also thought about just running an adapter plate to raise the Whipple as well. Anyway, the Whipple is sold now and I have a complete Lightning motor. I also have an extra M122, TB and inlet tube in the garage. I am aware of the VooDoo adapter. So you guys would use the 3V heads on the 5.4 block. I'm looking at keeping the internals stock for now, now as far as running the OEM 3V heads, what else would I need for the top end? Would I be able to replace my 3V engine harness/ECU with a 2V harness/ECU and continue mission?
link that voodoo adapter. i've not seen it yet.
before anyone bitches, that's a screamin price. Mine cost a few times that much.
whats your CR going to be? if its high your just asking for trouble to try and get a power adder to make 600hp with i high CR. id start planning on what you want now before you shoot from the hip. if you want to go FI then swap the piston and just do it right the first time so you can enjoy it when its all done! JMO!
If we had any gas stations around here that had e-85, I would set it up for that and not even worry about it. I've read of people running 15+ pounds of boost on 11:1 cr on e-85.
I think the safety of my block is going to depend on my tune and I have an awesome tuner.
R3D, I have no problem with the price of the longtubes with matching x-pipe. I think I had almost 800 in my BBK longtubes and x-pipe. What's 400 more dollars. It's nothing but money and we make it every day. I'm just trying to reach TJ and get name on a set. I left another message today. I am a patient person because not going to swap out motor till april. I have emailed once and called probably 5 times in last month. Recently, I have been thinking about a turbocharger instead of a supercharger. Does anyone know if TJ makes turbo headers or another company that makes such headers for the DIY turbo kit.
Voodoo stuff http://www.lightningrodder.com/forum...ghlight=voodoo
Last edited by 2blownstangs; 12-29-2010 at 08:52 PM.
It's 10:1, it's not ridiculously high, but a bit higher than I would want. I've been reading up on it and most say that's not too bad as long as I run low boost or get a meth kit. I could always sell off these pistons and get some different ones so I could run a lot more boost though.
If we had any gas stations around here that had e-85, I would set it up for that and not even worry about it. I've read of people running 15+ pounds of boost on 11:1 cr on e-85.
I think the safety of my block is going to depend on my tune and I have an awesome tuner.
If we had any gas stations around here that had e-85, I would set it up for that and not even worry about it. I've read of people running 15+ pounds of boost on 11:1 cr on e-85.
I think the safety of my block is going to depend on my tune and I have an awesome tuner.
if i was you id swap the pisons now! just do it right so you dont worry about anything later. id plan now for NA or FI!!!