More and more items picked up.
#1
More and more items picked up.
I was himmin' and hawin' on picking up a blower while I had the time... the answer is, NO.
I just picked up a NOS NOSzle kit for 400 bones with all the toys. I'm going to mix parts from my other kit and my HPS intake to make a 75 shot shooting directly into the lower plenum of my intake, and then I'll use the NOSzle kit to do a 100 or 125 shot at the injector as a second stage for drag days and such.
So, the parts bucket so far is:
00 5.4L block
FRPP forged crank
2v stage 3 ported heads wtih all the standard goodies... stainless valves, 600 lift springs, titanium this and that's, etc.
Probe +.020 forged slugs
4340 H-Beam forged rods
Total seal rings
"hard" rod and main bearings
ARP head studs
ARP main studs
stage 2 cams
HPS intake
Apex Motorsports kevlar DF clutch
03 cobra flywheel
Reichard Racing intake adapter plates
NOSzle wet nitrous system (2nd stage)
custom dry nitrous system (1st stage)
Discuss.
I just picked up a NOS NOSzle kit for 400 bones with all the toys. I'm going to mix parts from my other kit and my HPS intake to make a 75 shot shooting directly into the lower plenum of my intake, and then I'll use the NOSzle kit to do a 100 or 125 shot at the injector as a second stage for drag days and such.
So, the parts bucket so far is:
00 5.4L block
FRPP forged crank
2v stage 3 ported heads wtih all the standard goodies... stainless valves, 600 lift springs, titanium this and that's, etc.
Probe +.020 forged slugs
4340 H-Beam forged rods
Total seal rings
"hard" rod and main bearings
ARP head studs
ARP main studs
stage 2 cams
HPS intake
Apex Motorsports kevlar DF clutch
03 cobra flywheel
Reichard Racing intake adapter plates
NOSzle wet nitrous system (2nd stage)
custom dry nitrous system (1st stage)
Discuss.
#5
00 5.4L block 550 (came with the rest of the complete motor, intake to oil pan)
FRPP forged crank Freebie
2v stage 3 ported heads wtih all the standard goodies... stainless valves, 600 lift springs, titanium this and that's, etc. 500
Probe +.020 forged slugs 510
4340 H-Beam forged rods 280
Total seal rings included with pistons
"hard" rod and main bearings 100 total
ARP head studs 230
ARP main studs 100
stage 2 cams 100
HPS intake Classified
Apex Motorsports kevlar DF clutch 75 bones baby
03 cobra flywheel 40
Reichard Racing intake adapter plates 375.. but ended up being free... long story
NOSzle wet nitrous system (2nd stage) 425
custom dry nitrous system (1st stage) Freebie
Don't forget about the little stuff like:
ARP balancer bolt - 25 bucks
255LPH fuel pump 125
30lb injectors 230
head gaskets 100
odds and ends: about 350. All tolled: 3908. So I've got about 4K in my longblock plus another grand for assembly. The closest thing that matches in a retail longblock is in the 7-10K range so I'm pretty happy. Saved a little and stuck to a budget.
FRPP forged crank Freebie
2v stage 3 ported heads wtih all the standard goodies... stainless valves, 600 lift springs, titanium this and that's, etc. 500
Probe +.020 forged slugs 510
4340 H-Beam forged rods 280
Total seal rings included with pistons
"hard" rod and main bearings 100 total
ARP head studs 230
ARP main studs 100
stage 2 cams 100
HPS intake Classified
Apex Motorsports kevlar DF clutch 75 bones baby
03 cobra flywheel 40
Reichard Racing intake adapter plates 375.. but ended up being free... long story
NOSzle wet nitrous system (2nd stage) 425
custom dry nitrous system (1st stage) Freebie
Don't forget about the little stuff like:
ARP balancer bolt - 25 bucks
255LPH fuel pump 125
30lb injectors 230
head gaskets 100
odds and ends: about 350. All tolled: 3908. So I've got about 4K in my longblock plus another grand for assembly. The closest thing that matches in a retail longblock is in the 7-10K range so I'm pretty happy. Saved a little and stuck to a budget.
Thread
Thread Starter
Forum
Replies
Last Post
foncarelli
Pictures
18
06-08-2010 05:32 PM
cobra1923
Pictures
25
05-16-2008 09:10 PM
ex-ricer98gt
Modular 4.6L Tech
7
09-08-2006 05:35 PM
Mustang Tuning
The Lounge
50
10-08-2004 02:04 PM