Modular 4.6L Tech For all your 1996-2005+ 2V, 3V, and 4V modular motor needs.

Theft indicartor problems

Thread Tools
 
Search this Thread
 
  #1  
Old 04-16-2006, 05:14 PM
ipesway's Avatar
Junior Member
Thread Starter
Join Date: Apr 2006
Posts: 5
Unhappy Theft indicartor problems

Hi im new here but i had a question...


I was working on my car the other day and when i went to turn it on it wont start. it cranks but will not turn over, also the theft indicator is blinking really fast. I looked in hte owners guide and it says that i have to take it into the dealer?? dos anyone know how to restart the theft indicator so that i donot have to take it in??:bash:

Thanks
 
  #2  
Old 04-17-2006, 07:49 AM
Samsstang's Avatar
Senior Member
Join Date: Dec 2004
Location: Colorado
Posts: 383
Default

Try your spare key, the chip inside might be damaged? i had the same problem a while back my car wouldnt start it was a bad key! My old one was cracked at the base, sometimes it would start & sometimes wont.
 
  #3  
Old 04-17-2006, 09:51 AM
ipesway's Avatar
Junior Member
Thread Starter
Join Date: Apr 2006
Posts: 5
Default

Its not the Key since itryed all 3 keys that i have. but the theft light still flashing reallyt fast. I think it needs to be reset!! but how
 
  #4  
Old 04-17-2006, 10:07 AM
Blk02stang's Avatar
I 8urvtec!!
Join Date: Mar 2005
Location: Va
Posts: 815
Default

My '02 did the same thing...turned out even after trying to reset the theft system....the ECU was bad...it had fried itself.
 
  #5  
Old 04-17-2006, 10:10 AM
ipesway's Avatar
Junior Member
Thread Starter
Join Date: Apr 2006
Posts: 5
Default

How did you reset it??
 
  #6  
Old 04-17-2006, 10:28 AM
Shambles's Avatar
Sigma Beta Rho Soldier
Join Date: Mar 2005
Location: Philadelphia, PA
Posts: 2,682
Default

What year is your car? I might be able to help you out.
 
  #7  
Old 04-17-2006, 10:40 AM
ipesway's Avatar
Junior Member
Thread Starter
Join Date: Apr 2006
Posts: 5
Default

It is a 2004 ford mustang GT

Thanks allot
 
  #8  
Old 04-17-2006, 10:49 AM
Shambles's Avatar
Sigma Beta Rho Soldier
Join Date: Mar 2005
Location: Philadelphia, PA
Posts: 2,682
Default

Can you read any Check engine lights and what did you do to the car when you were working on it?
 
  #9  
Old 04-17-2006, 11:23 AM
ipesway's Avatar
Junior Member
Thread Starter
Join Date: Apr 2006
Posts: 5
Default

I replaced the speedo cluster since it was cracked. theft light blinks really fast, and it cranks but wont turn. I hit the fuel pump switch but still wont turn???
 
  #10  
Old 04-17-2006, 11:36 AM
Shambles's Avatar
Sigma Beta Rho Soldier
Join Date: Mar 2005
Location: Philadelphia, PA
Posts: 2,682
Default

Make sure that your contacts are all connecting properly on the cluster. Disconnect the battery to reset the ECU as well.
 
  #11  
Old 04-17-2006, 12:05 PM
Blk02stang's Avatar
I 8urvtec!!
Join Date: Mar 2005
Location: Va
Posts: 815
Default

I was messin with somethin electrical also, and mine did the same stuff. The PAT system on the car is very sensitive, and if it get 1/2 volt too much...the computer will cook itself. Thats what Ford found wrong with mine. BTW i was installing a CD player...just plugin in the harness.
 
  #12  
Old 04-17-2006, 03:27 PM
Saleen S330's Avatar
Banned
Join Date: Jan 2006
Location: Sumter, SC
Posts: 900
Default

You will most likley have to take it to ford, i never heard of anyone resetting the anti theft at their home. but if you don't want to take it there, you can bypass the anti theft and it will start up. but you will have to cut a wire and run a new wire......
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Blk02stang
General Tech Forum
15
12-07-2014 11:46 PM
foncarelli
Videos
9
12-14-2005 08:06 PM
foncarelli
The Lounge
15
10-08-2005 10:17 PM
MineralGT
The Lounge
25
08-16-2005 07:35 PM
MadMustangs
General Tech Forum
2
02-27-2005 12:24 PM



Quick Reply: Theft indicartor problems



All times are GMT -7. The time now is 05:45 AM.