Trying to track down parts
#1
Trying to track down parts
So I have been looking for used 3.8 split port heads to do the swap and I have found that mustangs are hard to come by in the juckyards around me so I need to know what other vehicles split port heads will work right now I am under the assumption that 96+ windstars will work as well as the heads from a 4.2 f150 of a ford freestar can anyone give me some pointers on what will work
I have also found some heads on ebay for around 150 per head is this a good price and is there any difference between the right and left side or should any 2 work as long as they are in the same condition
I appreciate your help
I have also found some heads on ebay for around 150 per head is this a good price and is there any difference between the right and left side or should any 2 work as long as they are in the same condition
I appreciate your help
#3
would the heads from a 2000 ford e150 van work cause I found one in a junk yard about 9 mile from me and the price on the heads is 75 bucks a piece
it's got the essex 4.2 I just need to know if it will work
it's got the essex 4.2 I just need to know if it will work
#4
I just solved all my problems
www.car-part.com
this site kicks ***
I can get a set of heads off a 99 4.2 f150 for 100$ in good condition
and an upper and lower intake of a 2000 mustang for 100$
www.car-part.com
this site kicks ***
I can get a set of heads off a 99 4.2 f150 for 100$ in good condition
and an upper and lower intake of a 2000 mustang for 100$
#6
hey thats is a cool site i got it bookmarked
as far as the other parts that u can use this might help. this is a nice writeup i have saved for when the time is right for me.
http://www.3.8mustang.com/forum/showthread.php?t=95288
as far as the other parts that u can use this might help. this is a nice writeup i have saved for when the time is right for me.
http://www.3.8mustang.com/forum/showthread.php?t=95288
Thread
Thread Starter
Forum
Replies
Last Post