Trying to track down parts
 

So I have been looking for used 3.8 split port heads to do the swap and I have found that mustangs are hard to come by in the juckyards around me so I need to know what other vehicles split port heads will work right now I am under the assumption that 96+ windstars will work as well as the heads from a 4.2 f150 of a ford freestar can anyone give me some pointers on what will work

I have also found some heads on ebay for around 150 per head is this a good price and is there any difference between the right and left side or should any 2 work as long as they are in the same condition

I appreciate your help

dont know about the intake manifold ? but the ? about buying heads for 150 each is diff a good price

would the heads from a 2000 ford e150 van work cause I found one in a junk yard about 9 mile from me and the price on the heads is 75 bucks a piece
it's got the essex 4.2 I just need to know if it will work

I just solved all my problems


www.car-part.com

this site kicks ass

I can get a set of heads off a 99 4.2 f150 for 100$ in good condition

and an upper and lower intake of a 2000 mustang for 100$

Nicely done, do work. Also from what I remember the 4.2 uses the same heads as the 3.8.

hey thats is a cool site i got it bookmarked

as far as the other parts that u can use this might help. this is a nice writeup i have saved for when the time is right for me.

http://www.3.8mustang.com/forum/showthread.php?t=95288