Power Adders Technical discussions for forced induction with nitrous and blowers.

03 mach 1 dohc nitrous

Thread Tools
 
Search this Thread
 
  #1  
Old 07-11-2009, 01:01 AM
mach1dohc's Avatar
Junior Member
Thread Starter
Join Date: Jul 2009
Location: oklahoma city OK
Posts: 2
Default 03 mach 1 dohc nitrous

i have a ? i am running a 75 shot on my mach 1 right now with no tunning can i move the shot up to a 100 on 91 octane with no tunning and will it be alright ?
 
  #2  
Old 07-11-2009, 08:12 AM
r3dn3ck's Avatar
Wowbagger hates me too!
Join Date: Nov 2005
Location: Magrathea/California
Posts: 9,865
Default

you'll never find someone to say it's ok with that little info. If you have colder than stock plugs and your existing tune pulled some timing for the nitrous then it should be fine. You need to read the plugs and watch for detonation anyway. The 25hp difference should be minor but you really should toss it on a dyno and watch the AF ratio after the jet upgrade.
 
  #3  
Old 07-11-2009, 09:00 AM
spike_africa's Avatar
Administrator
Join Date: Sep 2004
Location: Orlando,Florida
Posts: 11,974
Default

You can run a 100shot on these cars with a bone stock car. The tunes from Ford are very weak and the fuel system can support a 100shot. As long as its a wet nitrous system and you run 1 step colder plugs, there is no reason a 100shot isn't fine. Thousands of cars on 100shots.
 
  #4  
Old 07-11-2009, 01:10 PM
White04GT's Avatar
KenneBell Blown
Join Date: Sep 2005
Location: Kingwood, Tx.
Posts: 1,287
Default

My buddy has a 100shot on his 99 cobra and has been running it for about 2 years with no tune. Like stated above just get 1 step colder plugs and you will be fine. You are always taking a chance with a power adder.
 
  #5  
Old 07-11-2009, 02:01 PM
mach1dohc's Avatar
Junior Member
Thread Starter
Join Date: Jul 2009
Location: oklahoma city OK
Posts: 2
Default

will i am being told to run a autolite AR92 sparkplug bye Autolite they say dont change the gap b/c it comes stock gap at 25
 
  #6  
Old 07-11-2009, 04:53 PM
spike_africa's Avatar
Administrator
Join Date: Sep 2004
Location: Orlando,Florida
Posts: 11,974
Default

I don't know what plug that is. Ngk TR6 plugs (part number 4177 at parts stores) or Autolite 103's are copper and one step colder and work great. You will need to gap them down to .035"
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
40thblckgt
Power Adders
27
09-09-2007 08:23 PM
New Products
New American Muscle Products
0
08-02-2006 03:05 PM
New Products
New American Muscle Products
0
08-02-2006 03:05 PM
spike_africa
The Lounge
4
07-16-2006 07:20 AM
my2001GT
Modular 4.6L Tech
5
11-21-2004 08:10 PM



Quick Reply: 03 mach 1 dohc nitrous



All times are GMT -7. The time now is 05:07 AM.