What else would I need for this?
#1
What else would I need for this?
Found this on Tampa Craigslist. I don't know what else I need to make it complete, or if it would even be worth it to buy all the parts separately versus just going to KB and buying the complete kit.
http://tampa.craigslist.org/pnl/pts/1056728268.html
http://tampa.craigslist.org/pnl/pts/1056728268.html
#5
This would probably be a pain in the ***. I'll just save up and buy the complete kit with the tuner.
#6
Hell yes, it would be!
#7
i think it says it comes with the intercooler!
#13
ture but it's not that bad of a comparison stock for stock the 05+ is faster but spikes got more than just nitrous and a tune I think it would be an interesting race to watch
#14
One thing is for sure... mine would definitely sound cooler. It would also be incredibly loud, even louder than it is now. You guys better start packing some earplugs when we meet up!
#15
here are what else i think you will need to install that thing. you can get all of this stuff aftermarket and the only thing i think you will need from KB is the hardware kit to install this correctly.
additional parts:
Reservoir - get a good one like the vortech piece
Heat exchanger look up the GORDS dual fan piece
15 feet or rubber line -
brackets for the heat exchanger - make your own otherwise around 150-200
pump to push the cooling water - 100
hose clamps a lot of them - 20-30
a drive belt - 50-60
maybe a couple idler pulley's -
larger injectors - 400
larger fuel pump - 100-130
Bigger MAF like a 90mm lightning MAF - 100
90mm MAF bracket -
CAI - something BIG 90mm or higher
Air Filter
hardware to install the blower to the car - 30 bucks maybe
tuner - 300
professional dyno tune - 500 max cost
i would put the cost of all that stuff in the 2k-2500 range total unless you can find most of it used. i didnt search any prices because i didnt want to spend that much time. i did take some guesses at how much it would cost you.
additional parts:
Reservoir - get a good one like the vortech piece
Heat exchanger look up the GORDS dual fan piece
15 feet or rubber line -
brackets for the heat exchanger - make your own otherwise around 150-200
pump to push the cooling water - 100
hose clamps a lot of them - 20-30
a drive belt - 50-60
maybe a couple idler pulley's -
larger injectors - 400
larger fuel pump - 100-130
Bigger MAF like a 90mm lightning MAF - 100
90mm MAF bracket -
CAI - something BIG 90mm or higher
Air Filter
hardware to install the blower to the car - 30 bucks maybe
tuner - 300
professional dyno tune - 500 max cost
i would put the cost of all that stuff in the 2k-2500 range total unless you can find most of it used. i didnt search any prices because i didnt want to spend that much time. i did take some guesses at how much it would cost you.
Last edited by stanger00; 03-02-2009 at 01:27 PM.
#17
Ive got a blower, but im voting on the bottle in this case.
Last edited by knife13; 03-03-2009 at 06:01 AM.
#18
The 2v can never loose!
Thread
Thread Starter
Forum
Replies
Last Post
v6ceez
General Tech Forum
16
03-30-2006 01:01 PM