View Poll Results: What are your 5.4L swap plans?
Voters: 220. You may not vote on this poll
Anyone intrested in 5.4L swaps, in here. Need you to opine.
#4653
Ok guys, a few questions I need some of your expert help on.
I've finally decided my build will be n/a, est 400rwhp. (4V)
1. recommended upgrade to MAF FRPP 90 mm (M-12579-54) ??
I've finally decided my build will be n/a, est 400rwhp. (4V)
1. recommended upgrade to MAF FRPP 90 mm (M-12579-54) ??
2. Fuel Pump? Can I mod my 98' body style to use the GT Super car $97 fuel pump? Will that be enough? Or should i spend $200 on the Walbro(sp?) pump
3. will tuning require a computer chip as well? what kind? cost?
3. will tuning require a computer chip as well? what kind? cost?
Last edited by ibanezsvo; 08-19-2008 at 05:35 PM.
#4656
Ok guys, a few questions I need some of your expert help on.
I've finally decided my build will be n/a, est 400rwhp. (4V)
1. recommended upgrade to MAF FRPP 90 mm (M-12579-54) ??
I've finally decided my build will be n/a, est 400rwhp. (4V)
1. recommended upgrade to MAF FRPP 90 mm (M-12579-54) ??
2. Fuel Pump? Can I mod my 98' body style to use the GT Super car $97 fuel pump? Will that be enough? Or should i spend $200 on the Walbro(sp?) pump
3. will tuning require a computer chip as well? what kind? cost?
3. will tuning require a computer chip as well? what kind? cost?
IIRC 98's were returnless. You might just be able to use the gt pump. You'll want to search around google for more on that.
I'd ditch the whole chip idea and get a handheld like an Xcal2. You can have custom tunes loaded on it just like a chip but the upshot is you don't have to pull your ECU out and apart to change the tune. Side benefit is if you need to back out some timing for a nitrous run you can do that at the track with the handheld. Chips are a bitch. Xcal2 or LiveWire or whatever is current from SCT would usually be the best choice.
#4657
well it looks like r3d will be the only one with some bada$$ long tubes on his 5.4 there are not enough ppl to ponyup the money for some quality parts, if i am wrong lets see some deposits for TPS to make us some sic LT's....
#4658
well it looks like r3d will be the only one with some bada$$ long tubes on his 5.4 there are not enough ppl to ponyup the money for some quality parts
#4661
well, the few 5.4's with long tubes and hps intake will be the ones making more power then the others.
as for my headers: i have purchased a new mig/tig after the gun on mine has crapped out. so i will fix the hackedup parts and possibly make them flow close to r3d's nicer/better ones.
as for my headers: i have purchased a new mig/tig after the gun on mine has crapped out. so i will fix the hackedup parts and possibly make them flow close to r3d's nicer/better ones.
#4662
well, the few 5.4's with long tubes and hps intake will be the ones making more power then the others.
as for my headers: i have purchased a new mig/tig after the gun on mine has crapped out. so i will fix the hackedup parts and possibly make them flow close to r3d's nicer/better ones.
as for my headers: i have purchased a new mig/tig after the gun on mine has crapped out. so i will fix the hackedup parts and possibly make them flow close to r3d's nicer/better ones.
#4664
R3D:
I saw back in 2005 you had some discussion about the fuel pumps in 98 GT's from the Aviator (what year)? Do I pull the pump and swap it and dump the new basket? If thats the case surely i can do that with the GT pump?
I saw back in 2005 you had some discussion about the fuel pumps in 98 GT's from the Aviator (what year)? Do I pull the pump and swap it and dump the new basket? If thats the case surely i can do that with the GT pump?
Last edited by ibanezsvo; 08-21-2008 at 07:22 PM.
#4665
IIRC 98's went returnless. In any case you'll want to double check that point. I can't promise that the GT pumps will fit your stock lines or harness though so be prepared to put it back together.
#4666
i would have like to have seen them completed and dyno'd before i make a choice on rather or not to get purchase them.
#4667
here is something for you blower guys: http://www.nloc.net/classifieds/show...ct/4724/cat/11
it's a setup minus the head unit, could be pickedup cheap.
it's a setup minus the head unit, could be pickedup cheap.
#4668
The hell of it is, once we dyno my car we'll have dyno results for exactly 1 car with 1 combo which won't tell much of a story to anyone without something on par with it. So what will end up happening is I'll make some great numbers and people will then say, "yeah well that's just that one car and it has heads and cams and intake and raised compression... there's no comparing it so my <insert lesser or greater setup here>..." and we still don't end up with parts made.
They're being designed by a place that knows performance and builds hard core race cars. It's a privilege to even have them work on them. They'll make power commensurate with the engine they're on. They'll fit perfectly and look fabulous. And they'll be the only game in town if there's ever a 2nd set made.
#4670
I totally understand that and I sympathize... consider my gamble. Still, that being the case with most people as was feared, deposits were and would again be necessary before they'll be made. So we're in a catch 22. I guess we'll find out how it responds on my car and go from there. It's not a killed project yet necessarily since I'm still having them made for me so we can always get them made later in theory. Later on my willingness to be without my car for a month may be slightly less though and the people I worked with to get this far this time will probably balk next time.
The hell of it is, once we dyno my car we'll have dyno results for exactly 1 car with 1 combo which won't tell much of a story to anyone without something on par with it. So what will end up happening is I'll make some great numbers and people will then say, "yeah well that's just that one car and it has heads and cams and intake and raised compression... there's no comparing it so my <insert lesser or greater setup here>..." and we still don't end up with parts made.
They're being designed by a place that knows performance and builds hard core race cars. It's a privilege to even have them work on them. They'll make power commensurate with the engine they're on. They'll fit perfectly and look fabulous. And they'll be the only game in town if there's ever a 2nd set made.
The hell of it is, once we dyno my car we'll have dyno results for exactly 1 car with 1 combo which won't tell much of a story to anyone without something on par with it. So what will end up happening is I'll make some great numbers and people will then say, "yeah well that's just that one car and it has heads and cams and intake and raised compression... there's no comparing it so my <insert lesser or greater setup here>..." and we still don't end up with parts made.
They're being designed by a place that knows performance and builds hard core race cars. It's a privilege to even have them work on them. They'll make power commensurate with the engine they're on. They'll fit perfectly and look fabulous. And they'll be the only game in town if there's ever a 2nd set made.
#4673
what plates are you guys talking about? ... the intake manifold adapter plates? what size does it convert to and from?
I'm cutting cheap out on my project now. I asked for 10k from the bank to finish it up real quick......D-Nide. Since I just want it going up and quick and start swapping parts one month at a time.... need to get that 200k 4.6sohc out, she's on her last leg.
I'm cutting cheap out on my project now. I asked for 10k from the bank to finish it up real quick......D-Nide. Since I just want it going up and quick and start swapping parts one month at a time.... need to get that 200k 4.6sohc out, she's on her last leg.
#4676
also...
R3D: from a post back in 05 again...
"5.0/Super Fords did a 2 part article on this in Nov 2003 and Jan 2004. Very good detailed articles, in fact the bulk of what you need to know in the way of little details is in there"
do you know the name of this article so i can find it on their website? or have a link to it?
#4677
I get my intake next week or the week after if all goes right. Myillwillinc and I have been in contact with HPS and they're staring at 3 of the prototypes. The intake is made. Impatience is understandable but since someone went and did it for us I'd call it cool and give them some credit. There's a lot of money tied up in the 5.4 intakes and it's not a simple thing to do.
You'll never get any 4.6L longtube to fit without cutting and welding it till hell won't have it. It's not impossible but it'll cost around 3K to have a shop do it.
ibanez: Please PM me your email addy and I'll send you the articles.
Morgan: I'll hook you up on my plates and maybe even my HPS 4.6 intake on the cheap if it helps finsh you up since I'm getting a new 5.4L HPS intake. You'll get most of the benefits of the 5.4 intake that way. I have ported reichard plates too... mucho spendy. PM me if you want to work that deal since we can do that sooner rather than later.
You'll never get any 4.6L longtube to fit without cutting and welding it till hell won't have it. It's not impossible but it'll cost around 3K to have a shop do it.
ibanez: Please PM me your email addy and I'll send you the articles.
Morgan: I'll hook you up on my plates and maybe even my HPS 4.6 intake on the cheap if it helps finsh you up since I'm getting a new 5.4L HPS intake. You'll get most of the benefits of the 5.4 intake that way. I have ported reichard plates too... mucho spendy. PM me if you want to work that deal since we can do that sooner rather than later.
#4678
BTW... I may be picking up a Roush MP90 supercharger later today to go with my Roush blower intake manifold for 4.6L.
So, I'll be selling a blower kit soon or adding 5lbs of boost to mine.
So, I'll be selling a blower kit soon or adding 5lbs of boost to mine.
#4679
the wife gave me a present this morning... a brand new Momo suede steering wheel and hub adapter
http://www.maximummotorsports.com/st..._image&pID=470
That'll pull another 30lbs from the car with losing the airbags. Wooohoo.
http://www.maximummotorsports.com/st..._image&pID=470
That'll pull another 30lbs from the car with losing the airbags. Wooohoo.
#4680
http://www.kookscustomheaders.com/ca...4.6)%20Mustang