Help!
#1
Help!
I've been having some problem with my back brakes, it's either the rotor or the pads, I'm not sure. I do have some cheap CarQuest pads on there, I swear they're a piece of s***. All I know is you can hear them squeaking really bad and it's annoying.
Question: What are good rear brake pads for a stock brake system and how much? Same with rotor's too please.
1995 Ford Mustang 5.0 GT
Question: What are good rear brake pads for a stock brake system and how much? Same with rotor's too please.
1995 Ford Mustang 5.0 GT
#3
I've been having some problem with my back brakes, it's either the rotor or the pads, I'm not sure. I do have some cheap CarQuest pads on there, I swear they're a piece of s***. All I know is you can hear them squeaking really bad and it's annoying.
Question: What are good rear brake pads for a stock brake system and how much? Same with rotor's too please.
1995 Ford Mustang 5.0 GT
Question: What are good rear brake pads for a stock brake system and how much? Same with rotor's too please.
1995 Ford Mustang 5.0 GT
As for the pads, well...for you, I'd recommend the SFM pads. Just head for your local parts house and ask for them by name. They are somewhat new, so they might not even have them in their computer system yet. If there is any confusion, as for the Stay-Frees...Maxis to be more specific.
j/k...I know Im going to hell now, but I couldn't resist.
#4
Find out the name, so I can fix mine. :P What are good brake pads though? I don't really care for that stuff because it looks ugly. :/ Unless it would blend in, but yeah. haha
#5
Never fear, man...Help is on it's way. We are overnighting a jack, lug wrench, prescription eye glasses, and a flashlight to your location. Stay home tomorrow, as a signature is required.
As for the pads, well...for you, I'd recommend the SFM pads. Just head for your local parts house and ask for them by name. They are somewhat new, so they might not even have them in their computer system yet. If there is any confusion, as for the Stay-Frees...Maxis to be more specific.
j/k...I know Im going to hell now, but I couldn't resist.
As for the pads, well...for you, I'd recommend the SFM pads. Just head for your local parts house and ask for them by name. They are somewhat new, so they might not even have them in their computer system yet. If there is any confusion, as for the Stay-Frees...Maxis to be more specific.
j/k...I know Im going to hell now, but I couldn't resist.
Last edited by BikerSk8rKid; 01-30-2009 at 06:34 AM.
#6
Hhhmmmmm...Well, lets just say the Stay-Free "Maxis" are usually just for the front, and ironically, thats usually where most of the friction is. I mean, depending on age, there can be more friction in the rear than in the front...just be sure to use alot of that orange lube.
#7
Hhhmmmmm...Well, lets just say the Stay-Free "Maxis" are usually just for the front, and ironically, thats usually where most of the friction is. I mean, depending on age, there can be more friction in the rear than in the front...just be sure to use alot of that orange lube.
#8
Originally Posted by BlueOvalFanatic
As for the pads, well...for you, I'd recommend the SFM pads. Just head for your local parts house and ask for them by name. They are somewhat new, so they might not even have them in their computer system yet. If there is any confusion, as for the Stay-Frees...Maxis to be more specific.
Trust me. I know these things.
#9
Just because the pads make noise does not mean they are bad. If they are new like you say then you just need to take them back off and relube the calipers and add some anti squeal to the back of the pads and it should stop making noise. You should check your front pads also while your at it to see how much material is left on them.
#10
Carquest products are not crap, especially since most of the time, their parts are better than OEM. Now, when you got new pads, did you turn the rotors also? Also, did you break the pads in? Neglecting both these steps would cause squeaking. I would also check that you didn't glaze the rotors, which would also cause noise. Now, if all this checks out, I also second putting anti-squeal on the pads.
#12
LOL...Anyway, biker- The noise could be not lubed on the back good enough, or it could be just a cheap pad. I put some Auto Zone cheapies on my wifes car, and they squealed bad. I put the mid-grade pads on, and it was fixed. Your problem could also be the fact that he left off the metal piece. If it comes with it, it's usually a safe bet that you need it.
Another thing thats a possibility is on my DD, I had some NAPA pads on the back, and the inward side of the pad stuck out a little too far, and when the brakes werre applied, the edge of the bad would hit the beveled part of the rotor, by the hub.
Just take 'em apart, check 'em out, and go from there. I personally like ceramic pads, as they dont seem to squeak, and they dont leave behind the brake dust all over your wheels.
With the rotors, I couldn't tell you, but you can find them online at any parts store. They are usually pretty cheap, as they are "disposable". By the time they get a little wear on them, thay would be technically too thin to turn on a lathe.
My bad on the SFM pads...I'd go with Black Sunshines suggestion- the Extra Stay-Free Maxis seem to be the way to go.
Another thing thats a possibility is on my DD, I had some NAPA pads on the back, and the inward side of the pad stuck out a little too far, and when the brakes werre applied, the edge of the bad would hit the beveled part of the rotor, by the hub.
Just take 'em apart, check 'em out, and go from there. I personally like ceramic pads, as they dont seem to squeak, and they dont leave behind the brake dust all over your wheels.
With the rotors, I couldn't tell you, but you can find them online at any parts store. They are usually pretty cheap, as they are "disposable". By the time they get a little wear on them, thay would be technically too thin to turn on a lathe.
My bad on the SFM pads...I'd go with Black Sunshines suggestion- the Extra Stay-Free Maxis seem to be the way to go.
#13
Just because the pads make noise does not mean they are bad. If they are new like you say then you just need to take them back off and relube the calipers and add some anti squeal to the back of the pads and it should stop making noise. You should check your front pads also while your at it to see how much material is left on them.
Carquest products are not crap, especially since most of the time, their parts are better than OEM. Now, when you got new pads, did you turn the rotors also? Also, did you break the pads in? Neglecting both these steps would cause squeaking. I would also check that you didn't glaze the rotors, which would also cause noise. Now, if all this checks out, I also second putting anti-squeal on the pads.
LOL...Anyway, biker- The noise could be not lubed on the back good enough, or it could be just a cheap pad. I put some Auto Zone cheapies on my wifes car, and they squealed bad. I put the mid-grade pads on, and it was fixed. Your problem could also be the fact that he left off the metal piece. If it comes with it, it's usually a safe bet that you need it.
Another thing thats a possibility is on my DD, I had some NAPA pads on the back, and the inward side of the pad stuck out a little too far, and when the brakes werre applied, the edge of the bad would hit the beveled part of the rotor, by the hub.
Just take 'em apart, check 'em out, and go from there. I personally like ceramic pads, as they dont seem to squeak, and they dont leave behind the brake dust all over your wheels.
With the rotors, I couldn't tell you, but you can find them online at any parts store. They are usually pretty cheap, as they are "disposable". By the time they get a little wear on them, thay would be technically too thin to turn on a lathe.
My bad on the SFM pads...I'd go with Black Sunshines suggestion- the Extra Stay-Free Maxis seem to be the way to go.
Another thing thats a possibility is on my DD, I had some NAPA pads on the back, and the inward side of the pad stuck out a little too far, and when the brakes werre applied, the edge of the bad would hit the beveled part of the rotor, by the hub.
Just take 'em apart, check 'em out, and go from there. I personally like ceramic pads, as they dont seem to squeak, and they dont leave behind the brake dust all over your wheels.
With the rotors, I couldn't tell you, but you can find them online at any parts store. They are usually pretty cheap, as they are "disposable". By the time they get a little wear on them, thay would be technically too thin to turn on a lathe.
My bad on the SFM pads...I'd go with Black Sunshines suggestion- the Extra Stay-Free Maxis seem to be the way to go.
I just looked up rotors on AutoZone website and I see two different kinds
Duralast / Brake Rotor - Rear $34.99 with picture (rotor only)
Baer Decela / Brake Rotor - Rear $219.99 with no picture (pair)
Do I have to apply the Anti Squeal on the whole back part of the brakd pad or just where the Calipers touch?
Last edited by BikerSk8rKid; 01-30-2009 at 06:32 AM.
#14
If he said your rotors were warped, get new rotors. Turning them will only make it easier for them to warp later on. As for rotors, stick w/ stock or Brembo. Tire Rack has you covered there. As for the Anti squeal, it needs to be applied on the pad where the caliper touches it. So the whole back side should be fine on the piston side but on the other side, just the edges of the back since the caliper doesn't touch the middle.
#15
I agree with Bassman-
Take a look at your rotors. If they are warped you will need to get new ones. Turning is a simple temporary fix that will not be fun but in the long-run due to them warping. I use HawkPads for my front and you can get some decent ones for the rear. Most of the stopping power is from the front anyways. For the high pitch sounds you can put some grease on your caliper. Remember don't touch the brake pad with your fingers because they leave oil. Any oil on the pads will need to burn off or be warned of the sounds they can make lol.
Take a look at your rotors. If they are warped you will need to get new ones. Turning is a simple temporary fix that will not be fun but in the long-run due to them warping. I use HawkPads for my front and you can get some decent ones for the rear. Most of the stopping power is from the front anyways. For the high pitch sounds you can put some grease on your caliper. Remember don't touch the brake pad with your fingers because they leave oil. Any oil on the pads will need to burn off or be warned of the sounds they can make lol.
Last edited by MustangSteve; 02-02-2009 at 03:54 PM. Reason: spelling
#16
I agree with Bassman-
Take a look at your rotors. If they are warped you will need to get new ones. Turning is a simple temporary fix that will not be fun but in the long-run due to them warping. I use HawkPads for my front and you can get some decent ones for the rear. Most of the stopping power is from the front anyways. For the high pitch sounds you can put some grease on your caliper. Remember don't touch the brake pad with your fingers because they leave oil. Any oil on the pads will need to burn off or be warned of the sounds they can make lol.
Take a look at your rotors. If they are warped you will need to get new ones. Turning is a simple temporary fix that will not be fun but in the long-run due to them warping. I use HawkPads for my front and you can get some decent ones for the rear. Most of the stopping power is from the front anyways. For the high pitch sounds you can put some grease on your caliper. Remember don't touch the brake pad with your fingers because they leave oil. Any oil on the pads will need to burn off or be warned of the sounds they can make lol.
I thought about Hawk Brake Pads, but I'm not looking to buy expensive stuff.
#17
The Extra Stay-Free "Maxis" work better than the regular SFM pads. I had the opportunity of trying those last month. They control that extra friction a little better, they're thicker in order to absorb more wear and they're a little wider than normal so you have extra stopping power.
Trust me. I know these things.
Trust me. I know these things.
Thread
Thread Starter
Forum
Replies
Last Post
trickedoutstangg
The Lounge
13
06-30-2005 09:51 PM