want to lower 02 gt
#1
want to lower 02 gt
what to lower by 02 gt but give up lil ride as possible..don't even go to the track and I am going to put 20's on the car..if i do go to the track its going to be for **** and giggles....
#5
i seen some mustangs driving some deep dish 20's..they look pretty good to me..guess I have just to look at some more before i make up my mind..i had 18's on the 04 v6 that i had and it looked good...i am going for mostly looks but i am still going to build my car to have around 350-400 hp(Maybe more ) ....supercharger or nos....cams and that good stuff to help out..but thanks for your help..i am buying the springs tomorrow so I am just going to get hr's since everywhere I read is nothing but good things from them...thanks for the help...
#6
The Eibachs are pretty good too (the ones that drop the car 1.5", not sure on model name). When I bought my car, I thought it was the stock ride height but when I put in my control arms, surprise! The ride quality is not bad (unless you are going over a strip of pavement w/ patches galore and pot holes). Just make sure you take driveways and speedbumps at a slower speed. Scraping isn't a problem but it does happen if you go to fast.
#7
FRPP B springs would be my recommendation if you're using a giant wheel like that and you have ride quality concerns. Honestly a 20 is plum silly... 19's at most and 18's look best to me.
Remember.... the bigger the wheel the slower the car and the more you'll want to upgrade the brakes. Big wheels carry bigger centrifugal forces and take more braking power to stop, so if you're going that big... at least a 13" front and rear kit would be appropriate.
Enjoy.
Remember.... the bigger the wheel the slower the car and the more you'll want to upgrade the brakes. Big wheels carry bigger centrifugal forces and take more braking power to stop, so if you're going that big... at least a 13" front and rear kit would be appropriate.
Enjoy.
Thread
Thread Starter
Forum
Replies
Last Post