Originally Posted by BRNG ITT

It's on w/ adhesive. Just carefully pry one of the corners up with something plactic like a flimsy credit card, and then pull it off. Make sure to clean off all of the adhesive w/ adhesive/wax remover and clean the area really well before placing the new ones on. Here's the only somewhat difficult part: The stock GT emblems are centered by tabs that fit in 2 holes in the fender. The new emblem won't have these tabs. You have to make sure that you put the emblems on just right to cover these holes. My suggestion: before removing the backing on the new emblems, place them on the fender where you want them, and trace them w/ a non-permanent marker or pen of some sort. This way you'll have a guide of where to put them, because the adhesive is very sticky and unforgiving. Make sure to post some pics when done. Here's a better one of mine:

Originally Posted by rada

Much easier way to remove emblems is to use fishing line or dental floss to "saw" through the old two-sided tape. It usually involves a little more clean up on both the car and the emblem, but neither will be damaged.

Just my 2c!


Rada