Bullitt hoses
#1
Bullitt hoses
One of our two 2001 Bullitts is the version that came with a radiator hose going around the pcv valve. This involves a plastic tee fitting (3/4" on ends, 3/8" on top) at the firewall, coming out the heater hose area. On the 3/8'' goes a rubber hose, which on the other end is 1/4" (yes, on the same hose), going to another fitting, which then goes to the tube to the pcv valve.
The local Ford shop is no help, they say the parts do not exist, and I don't know what I'm talking about. What we need is the tee, both 3/4" hoses, and the top smaller hose. Can you do what no other dealer has been able to do, and locate the part numbers and prices?
I say no other dealer can, because this is a fairly common problem posted on IMBOC, and not one dealer has come up with a part number for any of the above.
Thanks,
Jeff Laughhunn
The local Ford shop is no help, they say the parts do not exist, and I don't know what I'm talking about. What we need is the tee, both 3/4" hoses, and the top smaller hose. Can you do what no other dealer has been able to do, and locate the part numbers and prices?
I say no other dealer can, because this is a fairly common problem posted on IMBOC, and not one dealer has come up with a part number for any of the above.
Thanks,
Jeff Laughhunn
#3
No, I need the two 3/4" hoses that go on both horizintal ends of the tee, and then the goofy hose that goes on top of the tee, which is about 12" long, and is 3/8" on the tee end, and 1/4" on the end that goes to the pcv line.
Thanks
Thanks
#4
I'll have the heated PCV valve asbly here tomorrow to look at and iirc those 2 hoses come wth the valve and that plastic T thats in the coolant hose, again iirc was only serviced in the coolant hose asbly and that part has since been disconected by FoMoCo
#5
Here is one of the threads on IMBOC, with a couple pictures of the parts.
http://www.imboc.com/forums/showthread.php?t=157499
http://www.imboc.com/forums/showthread.php?t=157499
#7
I've currently got it patched together with more fittings than a Rubix Cube. And I used a plastic reducer to get from the 3/8" to 1/4" hoses, that I'm not sure is temperature rated at all. So yes, I believe I'll be looking at the Ford house for all the other parts from the rest of the "normal" Bullitts, and lose that contraption.
Thanks for your time and assistance.
Thanks for your time and assistance.
Thread
Thread Starter
Forum
Replies
Last Post
New Products
New American Muscle Products
0
09-07-2006 05:05 PM
New Products
New American Muscle Products
0
09-07-2006 05:05 PM
New Products
New American Muscle Products
0
09-07-2006 05:05 PM