Idler pulley
#1
Idler pulley
Randy:
I may need to replace an idler pulley. I have a blower, and it is the one immediately underneath the blower pulley. I have a 2003 4.6 motor. The surface is worn and has a cupped appearance.
Can you help?
I may need to replace an idler pulley. I have a blower, and it is the one immediately underneath the blower pulley. I have a 2003 4.6 motor. The surface is worn and has a cupped appearance.
Can you help?
#5
Blake
#13
Those P1SC's seems to wear them out. The entire drive system gets a beating. I have replaced power steering pumps, 2 altenators, 1 idler pulley, and 2 tensioners
#14
Randy, how do I know if the tensioner is bad? How much of an effort is involved in replacing one?
#15
easy to replace, chances are if the pulley is bad the tensioner is not far behind. how many miles? what is the condition of the belt?
#16
The belt seems thin to me and is a bit beat-up on the outside edges. I don't have a new one to compare. BTW, with an otherwise stock 2003 motor and a Novi-2000, do you know what belt I am supposed to use? I can't read the numbers off the current belt.
I have a 2000 car with 67k on it. Last May, I swapped in a used 2003 motor that now has 12,000 miles on it (4,000 since theh swap). What I don't know is which pullies and tensioner was used. I guess I would assume that they came from the new motor, but I don't really know.
Blake
I have a 2000 car with 67k on it. Last May, I swapped in a used 2003 motor that now has 12,000 miles on it (4,000 since theh swap). What I don't know is which pullies and tensioner was used. I guess I would assume that they came from the new motor, but I don't really know.
Blake
#19
no
i got this from MPH.
you could call up paxton and ask them.
i got this from MPH.
Originally Posted by 68 GT
what size is your pulley ?
mine came with a 3.4 blower pulley on my 2000 Novi kit but it also was a kit for the intercooler. Mine is 107 inch 6 rib Gates belt. $45.00.
take your belt in and compare it to a 107 inch, and go from there. Just make sure you flatten them out completely when comparing them.
mine came with a 3.4 blower pulley on my 2000 Novi kit but it also was a kit for the intercooler. Mine is 107 inch 6 rib Gates belt. $45.00.
take your belt in and compare it to a 107 inch, and go from there. Just make sure you flatten them out completely when comparing them.
Thread
Thread Starter
Forum
Replies
Last Post
foncarelli
Power Adders
15
05-25-2006 11:41 PM