Modular 4.6L Tech For all your 1996-2005+ 2V, 3V, and 4V modular motor needs.

01 4.6 ticking from engine

Thread Tools
 
Search this Thread
 
Old Feb 12, 2009 | 07:38 AM
  #1  
01 RED GT's Avatar
Thread Starter
|
rice eater
Joined: Aug 2008
Posts: 170
From: southaven
Default 01 4.6 ticking from engine

ok so i have been having this ticking noise coming from my right side of motor for over a month now and it is constant no matter if its cold or warm and it ticks faster as i give it gas, so i assumed it was a lifter that was lose making the noise or possibly a manifold leak, but i just took it to my local shop today and they had it for a few hours and told me they had it narrowed down to the cam shaft or needing a new head, does this sound right to any of you? they quoted me nearly 2 grand to have it fixed after labor thats if it needs a new head worst case scenario, but i dont know im just kind of baffled right now and very pissed off so any input would be great thanks
 
Old Feb 12, 2009 | 12:32 PM
  #2  
bassman97's Avatar
blank
Joined: Jun 2006
Posts: 2,451
From: North Jersey
Default

Check to see if the exhaust manifold nuts are tight (as well as the nuts for the manifold-mid-pipe junction). If the noise is still there, try to pin-point what cylinder seems to be ticking and replace the lifters for the cylinder. Usually ticking is a sign of valvetrain issues (excessive lash) or exhaust leaks. Now I know the 03-04 Cobras had head problems that made a ticking noise but you have 2V heads so...
 
Old Feb 12, 2009 | 04:49 PM
  #3  
Leonide's Avatar
Avatar just for Jack
Joined: Feb 2008
Posts: 1,035
From: Whitehall, Ohio
Default

what about the friction bearings in the crankshaft?
 
Old Feb 13, 2009 | 12:07 AM
  #4  
00silvergt's Avatar
Member
Joined: Dec 2008
Posts: 30
Default

is it coming from the front? i had the same problem. the timing chain guides were worn out and the chain was loose. thats why it was ticking. one day i floored it and the car just turned off and wouldnt start back up. the chain jumped a tooth. now the valves are bent.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jacliff_3521
Modular 4.6L Tech
14
Jun 2, 2011 04:20 PM
huudoo
Modular 4.6L Tech
9
Oct 5, 2006 11:31 PM
p3s7_01
General Tech Forum
12
May 10, 2006 07:46 PM
apache46
Modular 4.6L Tech
2
Mar 12, 2006 10:05 AM
MattJ
General Tech Forum
10
Jul 5, 2005 05:02 PM




All times are GMT -7. The time now is 10:54 PM.