thinkin bout gettin a torque conv. with a rev limiter but dont kno if this will be a problem or turn out reall tight...if i set the torque conv. at bout 3000 rpms and the rev limiter to meet it at 3000rpms ill pretty much be starting in 2nd gear off the line will that mess my sh** up or just work as good as i hope???

 

sounds tricky.

 

wat you mean wat would be so tricky???like as in it may not work tricky loll???

 

dont ask me, i need help changing oil lol

 

I'm confused by what your trying to say. You want a 3k stall converter and a 2step set for the same rpm so you can rev it then go?

If so that's not how an auto works. You have a problems here the first is the stall is to low for a 2v car it needs to be higher. 2nd only way to get an auto to rev up then pop and go (assuming of course this is what you ment) is to use a transbrake and your stock tranny cant take it. A transbrake will send fluid to first and rev which basically lets the motor free rev once you let off the button it closes the valve to reverse so all the fluid goes to first and boom your gone. Sort of like dumping the clutch on a manual car.

Of course this is if i under stood what you were talking about.

 

so i should set the stall conv vert at wat? maybe 4 or wat? and for the rev limiter i think im confused at wat your saying i thought a 2step keeps me at a certain rpm till i hit the gas and i can set that first rpm limit to watever i want and as for the second unless im confused on wat a 2 step really does...wat would you recommend the stall conv to be for a street/strip car????

 

you can't "set" a converter, you buy it with a stall "rating". That actually changes depending on what car it is but that is a whole nother topic.

 

stall rating depends on mods done to the car, but I can tell you a 3k is way to low of a stall for a 2v car. You need to speak to someone who specializes in converters and trannies like the guys at www.bc-automotive.com