Torque Pleaze!
#1
Torque Pleaze!
Ok so with my lightly modded Bullitt what mods can i do to really make some torque. I wanna be able to jump off the line like a bullet from a gun in my bullitt. Please help because right now it feels sluggish off the line and it more like crawls off the line than jumps. HELP!!! I NEED TORQUE!!!
#9
Gears 1st off, but also a Throttle Body/Plenum will do you alot of good too. But I would say tires and gears. Go with some nitto 555Rs. The widest you can fit on your rim. Than you will really get a good launch!
Trust me I had the same problem when I 1st got my car.... 3.27s with 295s do not work!!!
Trust me I had the same problem when I 1st got my car.... 3.27s with 295s do not work!!!
#10
you can fit some 315s on those 10" rims, gears will definately help, 3.73 and 4.10 are popular, but 3.90 are also available, as well as the 03-04 Cobra's 3.55s. And a cheap easy one: nitrous. What most people don't realize is that nitrous will give you about 1 1/2 times the torque as the advertised horsepower. For instance, a kit rated at 100HP at 6500 RPM gives you about 150 Lbs more TQ down low. Nittos are good, as well as TA drag radials. A turbo or blower wil work, you can probably get a turbo set up relatively cheap, but you have to wait for spool, so it's not the best for TQ. Kenne Bell makes the most efficient supercharger available, unless you count whipple (same setup, different company) KB offers 2 kits for the GT, and it sounds like the 1.7 or 1.7 intercooled would probably fit your application, and fits under your stock hood.
#11
Originally Posted by Blue Thunder
Ok so with my lightly modded Bullitt what mods can i do to really make some torque. I wanna be able to jump off the line like a bullet from a gun in my bullitt. Please help because right now it feels sluggish off the line and it more like crawls off the line than jumps. HELP!!! I NEED TORQUE!!!
is your car stick or automatic?
i'd say get some gears asap...
Originally Posted by stage2roush2002
Gears 1st off, but also a Throttle Body/Plenum will do you alot of good too.
#15
bullit TB is a twin bore 37mm IIRC. More than enough flow for a 4.62V. unless you go to forced induction on a bullit there's zero sense in upping the TB size. And I don't know of any plenums on the aftermarket for bullits
#16
Originally Posted by r3dn3ck
bullit TB is a twin bore 37mm IIRC. More than enough flow for a 4.62V. unless you go to forced induction on a bullit there's zero sense in upping the TB size. And I don't know of any plenums on the aftermarket for bullits
#17
Originally Posted by jeredan2003
he could have his stock intake ported then add a T/B.
Thread
Thread Starter
Forum
Replies
Last Post