Bent axle? Bent rim? I hope not...
#1
08-02-2007 | 07:38 PM
Thread Starter
|
Senior Member
Joined: Dec 2004
Posts: 10,237
Bent axle? Bent rim? I hope not...
Well you guys know I put my 17x9 and 17x10.5 bullitts on last week. I know I need an alignment but im having a bumpsteer kit put on too so im holding off on my alignment because its not bad. Well im coming home from milwaukee on the interstate and the tires are being loud. eh whatever, its drag radials and goodyears.... what do you expect. Well I get back into town with stop and go and its pretty loud. abnormally loud. I head up to work at 10pm (closed) but I can drive up and down and listen for sounds without cars bothering me. I open my door and drive and I hear a grinding noise and I can visually see my wheel wobbling.
ah ****, I think I bent an axle. i take it 2 mins down the road and wait till tomarrow. I come back to work and its still grinding but I can at least look at it. before I racked it up I went over for a visual inspection. 3 of 5 lugnuts could be turned by hand. wtf, these backed out or I didnt hammer down on them enough. I had some others sort of loose on each wheel too. flying down the interstate and loosing a wheel would of put me into the median. im glad im here to tell this story instead of someone else.
ah ****, I think I bent an axle. i take it 2 mins down the road and wait till tomarrow. I come back to work and its still grinding but I can at least look at it. before I racked it up I went over for a visual inspection. 3 of 5 lugnuts could be turned by hand. wtf, these backed out or I didnt hammer down on them enough. I had some others sort of loose on each wheel too. flying down the interstate and loosing a wheel would of put me into the median. im glad im here to tell this story instead of someone else.
#2
08-02-2007 | 07:47 PM
Guest
Posts: n/a
lol... everytime i take my wheels off and put em back on ill drive it around the block and recheck the lugs. Then next day ill go to work, get out, check the lugs. then check em again when i get home.
ive had these fuggin lugs loosen up on me before after swapping the wheels out.
ive had these fuggin lugs loosen up on me before after swapping the wheels out.
#4
08-02-2007 | 08:19 PM
Guest
Posts: n/a
glad you didn't wreck.
I TQ my lugs to 100ft/lbs. once a week I check them and tq again if necessary. Is it possible you were so excited to get them on that you forgot to tighten them?
are you thinking your axle is bent because of the loose rim/lugs? I would think as long as the rim stayed on the hub and didn't totally flop off, your axles should be fine.
I TQ my lugs to 100ft/lbs. once a week I check them and tq again if necessary. Is it possible you were so excited to get them on that you forgot to tighten them?
are you thinking your axle is bent because of the loose rim/lugs? I would think as long as the rim stayed on the hub and didn't totally flop off, your axles should be fine.
#9
08-04-2007 | 09:44 AM
Wowbagger hates me too!
Joined: Nov 2005
Posts: 9,865
From: Magrathea/California
I've had so many lugs back off I've just gotten in the habit of using the torque wrench. 100lbs and check every weekend. My stock wheels didn't have the problem but these 17x9 R's are all the time loosening.
#10
08-04-2007 | 11:04 AM
Senior Member
Joined: Feb 2007
Posts: 624
Yup..... I wound up missing a lug nut a couple weeks ago, glad it was only one. I know damn good and well I put the muscle to em when I put em on. I was wondering how it backed off.... now I know..... these lugs dont do well with aftermarket wheels!
Glad you was able to tell the story bro! That means your OK and I found out to start checking my lugs more often!
Glad you was able to tell the story bro! That means your OK and I found out to start checking my lugs more often!
Thread
Thread Starter
Forum
Replies
Last Post
