Hey guys. I have recently been have trouble with my grill. The pony has fallen out and I have lost the original screws etc. I have tried regular screws and they dont hold the pony in. I used apoxy on the back side of the bracket, (metal to plastic) that worked for awhile but later it fell off again. Is there any product out there that could hold the pony on?

thanks

 

forgot the part number but i got some special screws from ford. havnt had any issues with them.

 

Sadly enough I've been using a tiestrap for years.

 

Run by your local auto glass place and ask them if you can have a little dab of windshield urethane, the stuff they glue the windshield in with. This **** will hold, if you need a Sherman glued to the wall........no problem! Be ready to use it right then and wear some rubber gloves and don't get it on the shiny parts. Good Luck

 

Or if you wanted you could probably use a small nut and bolt, and make sure to buy the nut with nylon lock stuff in the threads.

 

ok thanks for the ideas guys!