Heads for 351w stroked to 438ci ?
Thread Starter
|
Member
Joined: Jun 2007
Posts: 75
From: Andrews,Texas
Heads for 351w stroked to 438ci ?
I'm currently building a all out race engine out of a 351w.
Started with a dart block 9.5 deck w/ 4.125 bore.
Eagle forged crank w/4" stroke
eagle H beam 6.2 rods
JE Dome top pistons w/ 14.5 to 1
I was looking at the AFR 225 heads Part # 1456.
Is this a good head for this combo. This engine will be running w/ 2 stages of nitrous
Started with a dart block 9.5 deck w/ 4.125 bore.
Eagle forged crank w/4" stroke
eagle H beam 6.2 rods
JE Dome top pistons w/ 14.5 to 1
I was looking at the AFR 225 heads Part # 1456.
Is this a good head for this combo. This engine will be running w/ 2 stages of nitrous
Wowbagger hates me too!
Joined: Nov 2005
Posts: 9,865
From: Magrathea/California
I'm currently building a all out race engine out of a 351w.
Started with a dart block 9.5 deck w/ 4.125 bore.
Eagle forged crank w/4" stroke
eagle H beam 6.2 rods
JE Dome top pistons w/ 14.5 to 1
I was looking at the AFR 225 heads Part # 1456.
Is this a good head for this combo. This engine will be running w/ 2 stages of nitrous
Started with a dart block 9.5 deck w/ 4.125 bore.
Eagle forged crank w/4" stroke
eagle H beam 6.2 rods
JE Dome top pistons w/ 14.5 to 1
I was looking at the AFR 225 heads Part # 1456.
Is this a good head for this combo. This engine will be running w/ 2 stages of nitrous
Thread
Thread Starter
Forum
Replies
Last Post
