wat short shifter to get?
#1
wat short shifter to get?
i seem to miss third gear quite often when racing. especially against camaros! must be an inexperience thing. looking to buy a shifter, but which one do i get? its a 97 cobra with a t45 i believe.
#4
won't matter... steeda, upr, blah blah. The only one a little different is the MGW. Get a tri-ax if you can't decide. At least there's not a worst thing to be had in this category.
Make sure you get one that's spring centered on the 3-4 line. Cleans up that whole 3rd shift thing.
Make sure you get one that's spring centered on the 3-4 line. Cleans up that whole 3rd shift thing.
#6
MGW. its just the best out there...best made...best materials...so on and so on. It costs a little more than the others...but...you get what u pay for and its worth it because its one of the few things in your car you touch and use EVERY time you drive...its worth it to have the best.
#12
He's not going to find the MGW one there but good try.
Here's the mgw website:
http://mgwltd.com/mustang_1990-2004.shtml
Here's the mgw website:
http://mgwltd.com/mustang_1990-2004.shtml
#13
He's not going to find the MGW one there but good try.
Here's the mgw website:
http://mgwltd.com/mustang_1990-2004.shtml
Here's the mgw website:
http://mgwltd.com/mustang_1990-2004.shtml
#18
I like the pro5.0 more then the MGW...
#21
yes, it's pretty easy. I've done it a few times and the hardest part can be breaking the seal of the stock shifter in order to pull it off. The seal on my GT wasn't to tough, but the seal on my Mach was a bitch to break. Give it a shot, it's pretty easy.
Thread
Thread Starter
Forum
Replies
Last Post