V6 Tech Forums For all your 3.8L and 4.0L needs!

Need some help!!

Thread Tools
 
Search this Thread
 
  #1  
Old 12-07-2004, 02:46 AM
USAFTexan80's Avatar
Junior Member
Thread Starter
Join Date: Dec 2004
Posts: 2
Unhappy Need some help!!

Hello Mustang Enthusiats....I recently bought a 2000 Ford Mustang V6 3.8L...however, it is giving me a small problem. My Check engine light keeps popping on every so often. I took it to AutoZone and they pulled the code "455" from my check engine light, which reads "EVAP LEAK LARGE". The steps to fixing this by the book were, replacing the gas cap, then the EVAP canister, then something about the vaccum of the engine was messed up. I am totally lost about what I should do to fix this problem. When I see the light comes on, I dont notice ANY lack of performance whatsoever. Someone please help!!!
 
  #2  
Old 12-07-2004, 07:03 AM
spike_africa's Avatar
Administrator
Join Date: Sep 2004
Location: Orlando,Florida
Posts: 11,974
Default

check your gas cap, if it wont seal correctly it will do that. more than likly thats what it is.
 
  #3  
Old 12-07-2004, 10:12 AM
Mustangdewd3.8's Avatar
232 Pirate
Join Date: Nov 2004
Posts: 140
Default

yeah new cars get CEL from the gas cap not being on tight enough , take a look at that first.
 
  #4  
Old 12-07-2004, 08:09 PM
SilverSteed03's Avatar
The Cavalry
Join Date: Dec 2004
Posts: 126
Default

Thats would it should say on the inside of your fuel door. Thats most likely whats wrong. Let us know what happens.
 
  #5  
Old 12-07-2004, 09:43 PM
USAFTexan80's Avatar
Junior Member
Thread Starter
Join Date: Dec 2004
Posts: 2
Unhappy

Right, that's the first thing I did...was change my gas cap...and replaced it with the locking cap...and still the light comes on!!
 
  #6  
Old 12-24-2004, 06:59 AM
mrshoss97v6's Avatar
Look again it is a mouse
Join Date: Dec 2004
Location: San Antonio, Tx
Posts: 129
Default

There is a test service port on one of the main EVAP lines, it has a green cap on it. Either slighty pressurize the EVAP system from that point with a vacume pump. Or start checking all your EVAP lines, Vacume line for leaks with the vacume pump as well. Pressurize your EGR valve.Check the vent line that comes from your gas tank. Make sure it isn't cracked or broken anywhere. Make sure the port that goes into you EGR from the intake is all clean. If all that checks out good then I would replace DPFE sensor. Hope this helps you out...
 
  #7  
Old 12-24-2004, 07:50 AM
spike_africa's Avatar
Administrator
Join Date: Sep 2004
Location: Orlando,Florida
Posts: 11,974
Default

if its an aftermarket one it might not be sealing well.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
medicman
General Tech Forum
4
10-15-2005 06:36 PM
OneWicked46
Modular 4.6L Tech
6
08-01-2005 05:18 AM
trickedoutstangg
The Lounge
13
06-30-2005 09:51 PM
kcmustang
5.0L Tech
9
04-22-2005 09:20 PM
kcmustang
New Members!
1
04-18-2005 09:00 AM



Quick Reply: Need some help!!



All times are GMT -7. The time now is 11:33 PM.