Blue Thunder

So i'm going to put together a modular stroker motor that in the end should have billet internals, stage 2 blower cams and heads, and should be right around a 302 and a 5.0 it's going to be a daily driver an dneeds to be extremely reliable i will have an air to air....my question is should i purchase a vortec t trim or a Novi 2000?

__________________
Bullitt Mods:
4.10 's , Magnaflow Catback, Prochamber (OR), BBK Ceramic Lt's, Custom Tune, MGW Short Throw, SLP Line Lok, MM LCA's, MM XL SFC's, MRT CAI, Steeda UDP'S, Tokicko Illuminas, Steeda Sport Springs, MM CC Plates, X2 Balljoint, Bumpsteer Kit, MSD Coilpacks, Eaton LSD, 31 Mosers, Spec stage 2 clutch, Spec steel flywheel, M/T DR's.
Cervini's RA Hood, 04 Cobra F. Bumper, 18" Bullitt Wheels, 20% Tint, HID Kit, Smoked Headlights, Painted interior trim(DHG), Seq. Tailights, Billett Stuff.

White04GT

T Trim.

__________________
2004 White GT
just another Procharged GT.
401rwhp/407rwtq 8#'s in hot texas summer heat, built auto transmission.

stangcharger

novi 2000 imo the specs that i looked up said

-novi2000 1400cfm/ comparable to a D-1sc procharger

-t trim 1200cfm/ comparable to a p-1sc procharger

__________________
4.2L forged v6 p-1sc
www.hppmotorsports.com

436rwhp/378rwtq@15psi 19* 91oct+torco


www.stangcharger.com

Bottled GT

This is totally off topic...but I was looking at your mod list...you have BBK L/T's and a O/R Prochamber...I thought with L/T's you needed a shorty H??? Or will the Prochamber work??? Only reason I ask is because I had a prochamber on my car and then I changed it out for a shorty H...???...I'm confused...sorry for going Off Topic

__________________
2003 GT Performance Mods:
Borla Stingers, BBK O/R Shorty H, BBK Ceramic Coated L/T Headers, Steeda CAI, Accufab 75mm Tbody and Plenum, BBK U/D Pullies, FRPP 4.10 Gears with Motive Bearing Kit. Steeda Aluminum Lower Control Arms, Steeda F/L Subframe Connectors, Eibach Pro Kit, Steeda Tri Ax, NX EFI Wet Plate System, 17x9 Cobra R Fronts, 17x10.5 Cobra R Rears wrapped in Toyo Proxes

Collection Includes:
1996 3.8L Coupe
1996 4.6L GT Vert
1966 Coupe
2003 4.6L GT

Blue Thunder

They make a shorty prochamber but generally you have to call mac to order it but latemodelresto carries the shorty prochamber as well.

__________________
Bullitt Mods:
4.10 's , Magnaflow Catback, Prochamber (OR), BBK Ceramic Lt's, Custom Tune, MGW Short Throw, SLP Line Lok, MM LCA's, MM XL SFC's, MRT CAI, Steeda UDP'S, Tokicko Illuminas, Steeda Sport Springs, MM CC Plates, X2 Balljoint, Bumpsteer Kit, MSD Coilpacks, Eaton LSD, 31 Mosers, Spec stage 2 clutch, Spec steel flywheel, M/T DR's.
Cervini's RA Hood, 04 Cobra F. Bumper, 18" Bullitt Wheels, 20% Tint, HID Kit, Smoked Headlights, Painted interior trim(DHG), Seq. Tailights, Billett Stuff.

Blue Thunder

After researching this i've decided i'm going to run a novi 2000 with a huge fabricated air to air intercooler @ 15 psi of boost. I'm so excited.....!!!!

__________________
Bullitt Mods:
4.10 's , Magnaflow Catback, Prochamber (OR), BBK Ceramic Lt's, Custom Tune, MGW Short Throw, SLP Line Lok, MM LCA's, MM XL SFC's, MRT CAI, Steeda UDP'S, Tokicko Illuminas, Steeda Sport Springs, MM CC Plates, X2 Balljoint, Bumpsteer Kit, MSD Coilpacks, Eaton LSD, 31 Mosers, Spec stage 2 clutch, Spec steel flywheel, M/T DR's.
Cervini's RA Hood, 04 Cobra F. Bumper, 18" Bullitt Wheels, 20% Tint, HID Kit, Smoked Headlights, Painted interior trim(DHG), Seq. Tailights, Billett Stuff.

Silverone01

Are you having an intercooler fabricated or are you using Paxton's IC? I have the Novi 2000 with the Paxton IC and in the summer I have a big time cooling problem. Being that you are in Austin and I'm in Houston you may have a little cooler weather but then again when I'm up there for the ROT Rally it sure is hot.

Blue Thunder

I'm having a monster custom fabricated air to air intercooler installed and made for my bullitt that is pretty much twice the size of the paxton one....no cooling problems i hope! hahahaha!!!! I'm shooting to have the fastest DD Bullitt in existence. Mwahahahahaha! After this i'll be adding an afterburner hahaha j/k.

__________________
Bullitt Mods:
4.10 's , Magnaflow Catback, Prochamber (OR), BBK Ceramic Lt's, Custom Tune, MGW Short Throw, SLP Line Lok, MM LCA's, MM XL SFC's, MRT CAI, Steeda UDP'S, Tokicko Illuminas, Steeda Sport Springs, MM CC Plates, X2 Balljoint, Bumpsteer Kit, MSD Coilpacks, Eaton LSD, 31 Mosers, Spec stage 2 clutch, Spec steel flywheel, M/T DR's.
Cervini's RA Hood, 04 Cobra F. Bumper, 18" Bullitt Wheels, 20% Tint, HID Kit, Smoked Headlights, Painted interior trim(DHG), Seq. Tailights, Billett Stuff.