Need Help

bigdog1011972005 · 12-17-2005, 05:35 PM

I have a 88 5.0 and I have checked everything that I can think of, but my car still runs rich and under hard throttle it spits and sputters. When I bought new plugs the parts store told me that they needed to be gapped at .54, but the book says .44, which one is it?I have set the timing at 10 BTDC, is that right? The last thing is the idle will not turn down even if I back the screw all the way out, any ideas? Any help would be great
Thanks Adam

spike_africa · 12-18-2005, 10:42 AM

if its idling high that could be an vaccumn leak someplace like a broken hose or bad intake gasket or TB gasket etc..

as for running like ****, i would gap them at what the book says, and first things first can you get a fuel pressure test guage and tell us the fuel pressure, i am thinking it could be fuel related, so i would start there.

bigdog1011972005 · 12-18-2005, 11:02 AM

I have a fuel pressure regulator on it and its set at 38 lbs. Is that good.

dannyb785 · 12-18-2005, 11:17 AM

rofl bigdog...whats with all the numbers in your sn?

bigdog1011972005 · 12-18-2005, 12:49 PM

the date i got married and this year

spike_africa · 12-19-2005, 03:10 PM

Quote:

Originally Posted by bigdog1011972005

I have a fuel pressure regulator on it and its set at 38 lbs. Is that good.

that doesnt mean you have good fuel pressure. thats just a regulator.
you need to go to autozone, advanced autoparts etc.. and rent a fuel pressure test guage and see what its running at idle and WOT. do that and come bock and tell us what you got.

jbigbootsy · 01-25-2006, 07:40 PM

check your throttle position sensor , check the full sweep of it, closed to open throttle, look for flat spots , or dead spots with no voltage.

12-17-2005, 05:35 PM	#1 (permalink)
bigdog1011972005 Junior Member Join Date: May 2005 Posts: 23	Need Help I have a 88 5.0 and I have checked everything that I can think of, but my car still runs rich and under hard throttle it spits and sputters. When I bought new plugs the parts store told me that they needed to be gapped at .54, but the book says .44, which one is it?I have set the timing at 10 BTDC, is that right? The last thing is the idle will not turn down even if I back the screw all the way out, any ideas? Any help would be great Thanks Adam

12-18-2005, 10:42 AM	#2 (permalink)
spike_africa Administrator Join Date: Sep 2004 Location: Orlando,Florida Posts: 6,968	if its idling high that could be an vaccumn leak someplace like a broken hose or bad intake gasket or TB gasket etc.. as for running like ****, i would gap them at what the book says, and first things first can you get a fuel pressure test guage and tell us the fuel pressure, i am thinking it could be fuel related, so i would start there. __________________ Dustin 2002 GT Mustang 5-Speed Drag Radials,Sprayed,Powershifted WOOO HOOOO!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-18-2005, 11:02 AM	#3 (permalink)
bigdog1011972005 Junior Member Join Date: May 2005 Posts: 23	I have a fuel pressure regulator on it and its set at 38 lbs. Is that good.

12-18-2005, 11:17 AM	#4 (permalink)
dannyb785 Senior Member Join Date: Feb 2005 Posts: 3,176	rofl bigdog...whats with all the numbers in your sn?

12-18-2005, 12:49 PM	#5 (permalink)
bigdog1011972005 Junior Member Join Date: May 2005 Posts: 23	the date i got married and this year

01-25-2006, 07:40 PM	#7 (permalink)
jbigbootsy Junior Member Join Date: Jan 2006 Posts: 5	check your throttle position sensor , check the full sweep of it, closed to open throttle, look for flat spots , or dead spots with no voltage.