Exhaust Help

SoulReaper1234 · 04-10-2008, 05:13 AM

Hi I just bought two Cherry Bomb Glasspacks for my 1995 Ford Mustang GT. I know the exhaust is 2.5 inch.. but will a 2-1/4 fit? I could not find 2.5 inch in the length size I needed. If it does not fit are there adapters out there?

ClemsonStang · 04-10-2008, 09:21 AM

you can use adapter, can get them at any local parts store or exhaust shop.

SoulReaper1234 · 04-10-2008, 05:39 PM

Alright thanks I'm going to use angle pipe to fit it correctly. Do you just slip it over the inlet pieces and weld them on?

r3dn3ck · 04-11-2008, 08:32 AM

stock GT's from 94-04 came with 2.25" pipes. If you got a 2.25" muffler then you should be able to butt-weld them or possibly slip fit and clamp if they're the type for that.

04-10-2008, 05:13 AM	#1 (permalink)
SoulReaper1234 Junior Member Join Date: Apr 2008 Posts: 2	Exhaust Help Hi I just bought two Cherry Bomb Glasspacks for my 1995 Ford Mustang GT. I know the exhaust is 2.5 inch.. but will a 2-1/4 fit? I could not find 2.5 inch in the length size I needed. If it does not fit are there adapters out there?

04-10-2008, 09:21 AM	#2 (permalink)
ClemsonStang Senior Member Join Date: Aug 2006 Posts: 375	you can use adapter, can get them at any local parts store or exhaust shop. __________________

04-11-2008, 08:32 AM	#4 (permalink)
r3dn3ck Wowbagger hates me too! Join Date: Nov 2005 Location: Magrathea/California Posts: 6,513	stock GT's from 94-04 came with 2.25" pipes. If you got a 2.25" muffler then you should be able to butt-weld them or possibly slip fit and clamp if they're the type for that. __________________ Built 5.5L 2v and Maximum Motorsports Max Grip box. www.squarerootofone.com My CarDomain Page

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-10-2008, 05:39 PM	#3 (permalink)
SoulReaper1234 Junior Member Join Date: Apr 2008 Posts: 2	Alright thanks I'm going to use angle pipe to fit it correctly. Do you just slip it over the inlet pieces and weld them on?