V6 Tech Forums For all your 3.8L and 4.0L needs!

100k tune up..

Thread Tools
 
Search this Thread
 
  #1  
Old 11-13-2009 | 06:19 PM
krenogin's Avatar
Thread Starter
|
A pony.
Joined: Feb 2008
Posts: 1,782
From: Kentucky
Default 100k tune up..

Okay, so for my 100k tune up, i changed my oil, advance had a sale 5 quarts of mobil 1 with a mobil 1 filter with check valve and all that for 30 bucks, cant beat it. Changed my PCV valve. Flushing radiator fluid tomorrow. And changed my plugs from those suck *** bosch platinum 2's to some good old autolite copper plugs, 1.79 each. car runs like a top feels like. Anything else i should do? Im thinkin bout flushing the tranny and redoin all fluid and filter. gimme some more things.
 
  #2  
Old 11-15-2009 | 11:32 AM
spike_africa's Avatar
Administrator
Joined: Sep 2004
Posts: 11,974
From: Orlando,Florida
Default

Change the tranny fluid and change the power steering fluid too. Then clean the maf, IAC, EGR, and IAT and you will be good as new.
 
  #3  
Old 11-15-2009 | 04:26 PM
krenogin's Avatar
Thread Starter
|
A pony.
Joined: Feb 2008
Posts: 1,782
From: Kentucky
Default

mine doesnt have an IAT, i have that hole plugged off on the CAI too.. mines an 02, did they remove it for that year?
 
  #4  
Old 11-16-2009 | 06:26 PM
spike_africa's Avatar
Administrator
Joined: Sep 2004
Posts: 11,974
From: Orlando,Florida
Default

Didn't know yours was so new. They moved it into the maf in 01 for the GT's and I am not sure when they did that for the v6's.
 
  #5  
Old 11-18-2009 | 10:19 AM
the gillz's Avatar
Bruce Leeroy
Joined: Apr 2006
Posts: 678
Default

Originally Posted by spike_africa
Change the tranny fluid and change the power steering fluid too. Then clean the maf, IAC, EGR, and IAT and you will be good as new.
Is there somewhere that has more info on cleaning these 4 parts on 6ers??
 
  #6  
Old 11-18-2009 | 05:05 PM
Stanger Banger's Avatar
10 millionth red mustang
Joined: Oct 2009
Posts: 263
From: easthampton, Ma
Default

one day ill get my 98 v6 to 100k miles lol 11k more to go
 
  #7  
Old 01-17-2010 | 03:43 PM
K.G.B.'s Avatar
Senior Member
Joined: Dec 2008
Posts: 228
Default

Originally Posted by the gillz
Is there somewhere that has more info on cleaning these 4 parts on 6ers??
in need of a tune up and i also want to know that!
anyone?
 
  #8  
Old 01-18-2010 | 08:51 AM
r3dn3ck's Avatar
Wowbagger hates me too!
Joined: Nov 2005
Posts: 9,865
From: Magrathea/California
Default

MAF: spray electronics cleaner. Don't touch the sensor with ANYTHING but spray unless you're a pro.
IAC: remove and spray carefully with carb cleaner. Don't get any in the electric parts, just the metal stuff.
IAT: In 2001.5 they moved the IAT to the side of the main body of the MAF sensor. You'll know because your MAF will have 6 wires instead of 4. Treat just like you would the MAF.
EGR: Remove, spray the livin **** out of it with carb cleaner.

On GT's 2 of those parts are on your plenum so you could just as well pull the upper plenum as well and give it a shoot with the carb cleaner especially through the EGR hole in the back. And might as well clean the TB while you're there.
 
  #9  
Old 01-18-2010 | 04:06 PM
K.G.B.'s Avatar
Senior Member
Joined: Dec 2008
Posts: 228
Default

thanks alot red
Ill just research their possition and clean them out.(be doing the tune up tomorrow)
 
  #10  
Old 01-19-2010 | 01:07 PM
Dan2001's Avatar
Blue Oval>Bowtie
Joined: Apr 2009
Posts: 78
From: Reno, NV
Default

If you haven't done it recently a rear-end flush wouldn't hurt, and if you changed plugs the wires may need changing too, again, if they are stock and haven't already been changed. Also, the manual says to replace the shocks/struts at 60,000. I'll be doing it soon but it's expensive and that is not a very urgent replacement anyhow.
 
  #11  
Old 01-19-2010 | 01:31 PM
K.G.B.'s Avatar
Senior Member
Joined: Dec 2008
Posts: 228
Default

yea i changed my wires along with my plugs about 5 months ago.. My car is actually at the shop right now getting its oil change and i told them to drain my steering wheel fluid cause it smells burned big time!.
I got my tokyco hp's about 4 months as well so im good on that side.
i've never done the rear end nor the transmition so i may do that within this next two months
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ex-ricer98gt
General Tech Forum
1
09-15-2006 03:22 PM
dannyb785
The Lounge
30
10-08-2005 07:59 PM
Lamar
Modular 4.6L Tech
2
05-10-2005 10:16 AM
Blue02GT
Dyno Results
4
04-23-2005 09:00 AM
engineman312
V6 Tech Forums
0
03-28-2005 09:26 AM




All times are GMT -7. The time now is 10:31 PM.