What in the hell should i get?????
#1
What in the hell should i get?????
OK yall im still debating on getting 4.10 gears/T-lok or 56mm throttle body "OR MAYBE SUMTHING ELSE". The MAC LT Headers are out of the question because MAC has not made any yet. So in 2 weeks or less i could buy me a new mod but i dont know wat to get. I could get the gears and t-lok but will have to wait for like 2 or 3 months to get them installed (for the reason is that its going to cost 3 bills to get them installed and im already paying like about 357.00 for gears/tlok). The throttle body i could order n install it myself. And no yall i cant just get nitrous MY WIFE SAID NO ABOUT THAT i mean i would but cant
I know that the gears n tlok will help improve my acc. but i want sumthing that i could install the same day or even install like about 3 or 4 days later
Or is there anything else under 400.00 that i could get?
thanx in advance
I know that the gears n tlok will help improve my acc. but i want sumthing that i could install the same day or even install like about 3 or 4 days later
Or is there anything else under 400.00 that i could get?
thanx in advance
#3
I'd say cams. I'd do something with internals. Anything else is really just farting around on a sixer...
I use www.supersixmotorsports.com
My advice would be hold your cash and do some real upgrades
I use www.supersixmotorsports.com
My advice would be hold your cash and do some real upgrades
#5
hold it you dummy!!!!
an aluminum driveshaft is a finish mod, when you do other mods.
bro, seriously, get urself some split port intakes, a cam, and a set of heads and do that!!! you will see sooooo much power from that rather then doing them one at a time. or do gears and a t-lock. just buy them, and then save up another $400 to have them installed!!
an aluminum driveshaft is a finish mod, when you do other mods.
bro, seriously, get urself some split port intakes, a cam, and a set of heads and do that!!! you will see sooooo much power from that rather then doing them one at a time. or do gears and a t-lock. just buy them, and then save up another $400 to have them installed!!
#6
well the thing is that i want to just buy a mod n get it install asap or that very same day, i dont want to wait a couple of months to install it. If i were to get the gears n tlok i would save enough money to buy and have them installed and yes the cam is in my price range but to get it installed isnt, and the heads are more than 1g so thats out of pic for now
#7
well the thing is that i want to just buy a mod n get it install asap or that very same day, i dont want to wait a couple of months to install it. If i were to get the gears n tlok i would save enough money to buy and have them installed and yes the cam is in my price range but to get it installed isnt, and the heads are more than 1g so thats out of pic for now
gears, heads, cam. are only things worth it to you know.
#9
I COMPLETELY agree. It sucks man, but this hobby isn't cheap. You won't gain anything worth mentioning if you just put a throttle body or driveshaft on your car. You need to just put that money in a savings account until you're ready. Trust me, by the time you start adding up all the money you spend on smaller parts, you could have bought something bigger and be faster than you are now. Or what about suspension mods? Aftermarket shocks/struts is another direction you could go and be able to tell a difference immediately. And keep in mind all this is just my 2 cents and probably worth less than that.
#10
yes i plan on getting the H&R Race Springs, KYB AGX Sport Adjustable Front Struts,
KYB AGX Sport Adjustable Rear Shocks, soon
but the thing is that i want to just get rid of the few bolt ons i have left (56mm throttle body, LT Headers etc..) n then after all that ill be moving onto the heads, cams, etc...
and after i finish with the bolt ons i want to get the gears n tlok
then the aftermarket springs n shocks/struts
after that comes the heads
then cam
then 24lbs injectors n the other **** that is needed for the injectors (like bigger fuel pump etc..)
KYB AGX Sport Adjustable Rear Shocks, soon
but the thing is that i want to just get rid of the few bolt ons i have left (56mm throttle body, LT Headers etc..) n then after all that ill be moving onto the heads, cams, etc...
and after i finish with the bolt ons i want to get the gears n tlok
then the aftermarket springs n shocks/struts
after that comes the heads
then cam
then 24lbs injectors n the other **** that is needed for the injectors (like bigger fuel pump etc..)
#11
yes i plan on getting the H&R Race Springs, KYB AGX Sport Adjustable Front Struts,
KYB AGX Sport Adjustable Rear Shocks, soon
but the thing is that i want to just get rid of the few bolt ons i have left (56mm throttle body, LT Headers etc..) n then after all that ill be moving onto the heads, cams, etc...
and after i finish with the bolt ons i want to get the gears n tlok
then the aftermarket springs n shocks/struts
after that comes the heads
then cam
then 24lbs injectors n the other **** that is needed for the injectors (like bigger fuel pump etc..)
KYB AGX Sport Adjustable Rear Shocks, soon
but the thing is that i want to just get rid of the few bolt ons i have left (56mm throttle body, LT Headers etc..) n then after all that ill be moving onto the heads, cams, etc...
and after i finish with the bolt ons i want to get the gears n tlok
then the aftermarket springs n shocks/struts
after that comes the heads
then cam
then 24lbs injectors n the other **** that is needed for the injectors (like bigger fuel pump etc..)
#12
but the thing is that i dont know which bolt ons i should get first, lol, i really want the damn LT headers but MAC hasnt made any yet, so im probaly gonna be stuck with getting the throttle body
and i know that engineman312 said that the aluminum driveshaft is a finish mod but i want that **** right now and in which ill be ordering, after that im going to see if MAC has made any more LT Headers, if not then i might as well go with the throttle body or maybe instead of the throttle body i could go with rocker rollers ohh yaaa,
driveshaft
rocker rollers
Throttle body
LT headers
gears
tlok
lowering springs
struts
shocks
(ohh i forgot the s281 wing, 8inch antenna, chin spoiler but ill probaly get these in between mods)
heads
cam
injectors
fuel pump
does this sound good yall?
si or no?
and i know that engineman312 said that the aluminum driveshaft is a finish mod but i want that **** right now and in which ill be ordering, after that im going to see if MAC has made any more LT Headers, if not then i might as well go with the throttle body or maybe instead of the throttle body i could go with rocker rollers ohh yaaa,
driveshaft
rocker rollers
Throttle body
LT headers
gears
tlok
lowering springs
struts
shocks
(ohh i forgot the s281 wing, 8inch antenna, chin spoiler but ill probaly get these in between mods)
heads
cam
injectors
fuel pump
does this sound good yall?
si or no?
Last edited by 3.8LMustang; 07-03-2008 at 09:55 AM.
#13
The driveshaft,fuel pump, injectors, and TB are a waste of money on your car; spend your money on something that will actully make it faster. Either save and get the gears t-lok or save ad a get a used blower would be what I would do since your wife supposibly says no nitrous.
Thread
Thread Starter
Forum
Replies
Last Post
kafton2007
V6 Tech Forums
2
03-03-2005 09:13 PM