Just wandering how difficult this is. Could I install an under drive pulley on an 05 myself? Thanks

 

Dont try it yourself. There VERY hard to get off if you dont have the right tools. It only costs maybe 30 minutes worth of labor

 

Yeah, but I can buy the Harmonic balancer pulling tool for 13 bucks. I'll see if I can find a mechanic around here that will do it on the cheap....

 

Its not difficult if you have all the tools but could be expensive if you dont. Whats needed is an Alternator pulley extractor,crank pulley extractor,torque wrench,breaker bar or equilvilant plus sockets and rachet. You have to get the correct crank extractor dont use the a standard pulley extractor like the one for the alternator. The most it should take is 1hour if you have all the tools.

 

Damn! I can't get a straight answer from ford about installing T-Lok on my 05 stang. They did say it's a 6 hr job 645.00 in labor but can't tell me if I'll need parts other than the diff itself. I guess I'll blow that off for now, unless anyone knows a good shop in the houston area......Also they won't install the UDP! WTF!!

 

A Ford dealer did my UDP's for $50

 

Damn, that sucks. They told me they wouldn't modify from stock. I'm going to go ahead and order them....I'll find a mech somewhere to do the install.

Have you had any trouble since installing? Water pump, alt, ac all still working as they should?

 

Nope...no problems. They will be comming off next week due to installing a blower. BTW, I was happy with $50.00. That was a no brainer IMO.

 

Find someone other than Ford to install Mod's for your car!!

They are way overpriced for labor!!!!!

 

not to take anything away from your thread but do anyone know where i can get under drive pullys for my 04 3.9? i know they make ones for the 05 but can't find any for my car, i'm just wondering if i'm looking in the wrong places.

 

Try this site http://rpmoutlet.com/newv6m.htm 94-04 mustangs.

 

its very very easy i dont knwo what your talking about like usual.

All you need is a either a air gun (highyl recomend) or a breaker bar to get the crank bolt loose. After that you can rent a harmonic balanecer pully puller and take it off install new one and tighten down with a tourqe wrench to the proper specs.

i did mine on my car maybe 30mins of work? its fast and easy dont pay anyone to do it. especialy if your freinds have air tolls and a tourqe wrench or if you have them all.

 

+1...took me about 45 minutes to do mine. If you've got the tools, it's not hard at all!!!

 

+2 the way i see it is. It's your car you should do the work to it. Especially easy stuff like taking pulley's off. I had never done it and i recently took all the pulleys off a 89 xr-7 its not hard at all.

 

i would advise AGAINST rpmoutlet.com

i know a lot of people that have had HORRIBLE service from them. and a lot of ripped off customers.

if you want v6parts you have

www.vmptuning.com
www.supersixmotorsports.org
www.rpmmustangs.com

oh and you can do the UDP yourself, no biggie just take yourtime and read directions.

as far as a tlok install i got 3.73's and a tlok in for 225$ total labor, find someone that isnt going to rape you for it