another drag radial question..
#1
another drag radial question..
So, I made a thread about a week ago just talking about what drag radials i should go with. I always hear that the MT ET streets are the best out there, but have always been told that they dont make them for a 18" rim. Well i was talking to my friend who is also building up a mustang and he asked me why i wasn't going with ET streets. I explained to him that i had an 18" rim and he said look at this link:
http://www.jegs.com/i/Mickey+Thompso...753925%7C36685
Its a 305/35/18....which is the same size i was going to go with the Nitto 555R's. Just wondering what your guys feedback is...thanks! these will be going on 18x9 rims...
Mike
http://www.jegs.com/i/Mickey+Thompso...753925%7C36685
Its a 305/35/18....which is the same size i was going to go with the Nitto 555R's. Just wondering what your guys feedback is...thanks! these will be going on 18x9 rims...
Mike
#4
284 a tire you could get a badass looking street tire for the same price.
#6
when is your car breaking loose? if its during a launch off of a stop light then nothing will fix that because its the "street" and 35 psi of air in your tire. also if the temps are below 40* then your tires will not hook that well either.
#8
my experience with DR's and 400 hp is that a 315 nitto breaks loose pretty bad when i mash the peddle at 30 miles per hour in temps in the 30* range even 40* they dont do to well. those mickey's could be a different story, i dont know. if you want your car too hook well off of a stop light then your chasing the same dream that i am. your adjustable UCA's and LCA will help out a lot i dont have subframes so my chasis flex's big time.
those tires compare the dimensions to the nitto's dimensions and see if they will fit the same...look at the tire width it says 10" is the min
edit: im going to order some of these for my 17" rims since my nittos are toast and im not impressed with them at all 3 sets of decent life but shitty traction at tracks.
those tires compare the dimensions to the nitto's dimensions and see if they will fit the same...look at the tire width it says 10" is the min
edit: im going to order some of these for my 17" rims since my nittos are toast and im not impressed with them at all 3 sets of decent life but shitty traction at tracks.
Last edited by stanger00; 03-02-2008 at 03:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post