Suspension Talk Got a suspension part question? Post it here.

Installed H & R's and car is squeeking!

Thread Tools
 
Search this Thread
 
  #1  
Old 01-30-2008 | 02:05 PM
White04GT's Avatar
Thread Starter
|
KenneBell Blown
Joined: Sep 2005
Posts: 1,287
From: Kingwood, Tx.
Default Installed H & R's and car is squeeking!

I just got my car back from the body shop I had fish tailed and nailed a curb and smashed the back half of my car into a tree. Well long story short I got my car back and the only suspension damage was steering wheel bushings that were broke and had to be replaced. I just went ahead and had them install my MM caster camber plates. mach 1 shocks/struts and H & R sport springs, and my Cobra front brake kit. Well I got the car back today and I noticed while driving it I hear a squeeking noise coming from the front of the car. When I give it gas I can hear it getting louder and louder and when I let off the gas it slowly goes away. Does anyone know what this could be?
 
  #2  
Old 01-30-2008 | 02:15 PM
B-rett's Avatar
BMC Member# 03209
Joined: Jan 2005
Posts: 1,735
From: north ridgeville, ohio
Default

maybe this is way off but is it just ur pulleys? if it gets louder when u rev up that would be first thing i would check or belt
 
  #3  
Old 01-30-2008 | 02:50 PM
stanger00's Avatar
Senior Member
Joined: Nov 2004
Posts: 3,842
From: Pinole, Ca
Default

take if back to the shop have them take a ride with you. im thinking bearings on your spindles. take it back to whoever fixed your ride.

a pulley going bad only makes a chirping noise. never heard belt squeal with a spring loaded tensioner.
 
  #4  
Old 01-30-2008 | 07:59 PM
TUFF 4.6's Avatar
"Just Add Foot"
Joined: Dec 2007
Posts: 2,250
From: Richmond Va.
Default

Hey man, it may just be the alternator charging your battery back up after it has been setting for a while. The belt may be slipping a very little bit under high output from alternator. I would give it a few hours of driving before I would worry.
 
  #5  
Old 01-30-2008 | 10:02 PM
White04GT's Avatar
Thread Starter
|
KenneBell Blown
Joined: Sep 2005
Posts: 1,287
From: Kingwood, Tx.
Default

Well I am supercharged and it kinda looks like the procharger got pushed back some. My check engine light is now on. The pulley is like almost touching my altentor now. I will try to get some pictures up.
 
  #6  
Old 01-30-2008 | 10:03 PM
White04GT's Avatar
Thread Starter
|
KenneBell Blown
Joined: Sep 2005
Posts: 1,287
From: Kingwood, Tx.
Default

and it is a chirping noise. The faster I go the louder it gets when i start slowing down it gets less noticeable.
 
  #7  
Old 01-30-2008 | 11:37 PM
singlesupra's Avatar
Senior Member
Joined: Oct 2007
Posts: 269
Default

What happens if you push the clutch in when going down the road? What if you pull it outa gear and leave it in neutral with the clutch out while going down the road? Does it do it at a standstill and get faster if you rev it up? This will help you rule out if its something engine related, driveline related or suspension/brake related
 
  #8  
Old 01-31-2008 | 06:08 AM
White04GT's Avatar
Thread Starter
|
KenneBell Blown
Joined: Sep 2005
Posts: 1,287
From: Kingwood, Tx.
Default

I am automatic.
 
  #9  
Old 01-31-2008 | 10:56 AM
singlesupra's Avatar
Senior Member
Joined: Oct 2007
Posts: 269
Default

Originally Posted by White04GT
I am automatic.
then try the reving in neutral thing and riding down the road in neutral, its the same procedure just no clutch pedal. You just need to figure out where the noise is coming from at this point before you can move forward
 
  #10  
Old 01-31-2008 | 09:41 PM
White04GT's Avatar
Thread Starter
|
KenneBell Blown
Joined: Sep 2005
Posts: 1,287
From: Kingwood, Tx.
Default

It's not coming from the front. With further inspection the sound is coming from the back. My back driver side rear rim smashed into a curb sideways and shattered. So I'm thinking its something from that. Or maybe they left my e-break on and it warped the brakes or missing clips. I don't know taking it back to the body shop tommrow.
 
  #11  
Old 02-02-2008 | 08:59 AM
White04GT's Avatar
Thread Starter
|
KenneBell Blown
Joined: Sep 2005
Posts: 1,287
From: Kingwood, Tx.
Default

I took it back to the body shop and it turned out to be a bent axle. Kick ***...
 
  #12  
Old 02-02-2008 | 09:07 AM
r3dn3ck's Avatar
Wowbagger hates me too!
Joined: Nov 2005
Posts: 9,865
From: Magrathea/California
Default

w00t
 
  #13  
Old 02-02-2008 | 09:09 AM
bassman97's Avatar
blank
Joined: Jun 2006
Posts: 2,451
From: North Jersey
Default

Maybe it's a good time to upgrade to 31 spline axles, if cash permits.
 
  #14  
Old 02-02-2008 | 09:17 AM
White04GT's Avatar
Thread Starter
|
KenneBell Blown
Joined: Sep 2005
Posts: 1,287
From: Kingwood, Tx.
Default

I would but I'm strapped on cash. My deductable was 1000 dollars. Plus I had all my suspension installed and bought the 10th anniv cobra front brake kit. I spent a good ammount of money last month on the car saving for a built auto tranny now. Damn s/c is eating up this auto right now.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
j21moss
Midwest
0
05-08-2011 07:31 PM
j21moss
Midwest
0
09-23-2008 09:00 PM
Rabbit
The Lounge
11
09-01-2006 12:58 PM
determined
Suspension Talk
5
07-21-2006 08:35 AM
liv4him
General Tech Forum
13
05-13-2006 08:12 PM




All times are GMT -7. The time now is 11:49 PM.