Fresh wax and new center caps.
Thread Starter
|
Senior Member
Joined: Apr 2008
Posts: 1,381
From: Sarasota, FL
Fresh wax and new center caps.
Hopefully this will be my last shoot before my new Bullitt scoops and a few other mods go on. The lighting sucked because I didn't really plan this shoot and got a late start. 
Since lighting was off I decided to play around with some editing too.
I am open to suggestions on the car and photos. Good, bad and indifferent let me here it.
Since lighting was off I decided to play around with some editing too. I am open to suggestions on the car and photos. Good, bad and indifferent let me here it.
Last edited by whitestang04; Apr 3, 2011 at 08:59 PM.
VeeSex
Joined: Dec 2008
Posts: 418
From: Greenport, NY
holly-get-your-window-retinted!
what's going on with your 3rd brake light and spoiler? black dot wise.
rear tire. btw love the way your car sits. what suspension are you running? (it will give me something to want to spend my money on)
what's going on with your 3rd brake light and spoiler? black dot wise.
rear tire. btw love the way your car sits. what suspension are you running? (it will give me something to want to spend my money on)
Thread Starter
|
Senior Member
Joined: Apr 2008
Posts: 1,381
From: Sarasota, FL
Thank you sir.
holly-get-your-window-retinted!
I plan to get it all re-tinted soon. LOL I want to wait until I get Bullitt sail panels and glass so I'm not having to go back and do things twice.
what's going on with your 3rd brake light and spoiler? black dot wise.
I can't believe I didn't catch that. I slipped when I was editing the plate. I'm going to fix it now.
rear tire. btw love the way your car sits. what suspension are you running? (it will give me something to want to spend my money on)
Right now it's sitting on Eibach (UPR) Prokit springs with everything else stock. I am trying to get a used set of Maximum Motorsports coil overs for the front to go with the Tokico D's and MM caster camber plates.
I plan to get it all re-tinted soon. LOL I want to wait until I get Bullitt sail panels and glass so I'm not having to go back and do things twice.
what's going on with your 3rd brake light and spoiler? black dot wise.
I can't believe I didn't catch that. I slipped when I was editing the plate. I'm going to fix it now.
rear tire. btw love the way your car sits. what suspension are you running? (it will give me something to want to spend my money on)
Right now it's sitting on Eibach (UPR) Prokit springs with everything else stock. I am trying to get a used set of Maximum Motorsports coil overs for the front to go with the Tokico D's and MM caster camber plates.
Thread Starter
|
Senior Member
Joined: Apr 2008
Posts: 1,381
From: Sarasota, FL
VeeSex
Joined: Dec 2008
Posts: 418
From: Greenport, NY
how long have you been riding on lowering springs with stock struts/shocks? i'm planning on doing the same but i'm terrified that i'll blow a strut/shock, or all of them. my car has 110 on it and they came with it back in '99.
Thread Starter
|
Senior Member
Joined: Apr 2008
Posts: 1,381
From: Sarasota, FL
If you skip the shocks and struts then blown factory units will cause a shitty ride quality. If you skip the CC plates you likely will have too much negative camber and you will have to buy new front tires every 10-15k miles. So it pays just to do it right once.
Last edited by whitestang04; Apr 3, 2011 at 10:12 PM.
Thread Starter
|
Senior Member
Joined: Apr 2008
Posts: 1,381
From: Sarasota, FL
Thanks guys. 
Keeko, I am not much of a fan of stripes on this body style.
Keeko, I am not much of a fan of stripes on this body style.
Thread Starter
|
Senior Member
Joined: Apr 2008
Posts: 1,381
From: Sarasota, FL
Thanks. I am not going to do any stripes on this car. If I had one of the newer styles I would consider it though.
On a side not I FOUND MY BULLITT SCOOPS, SAIL PANELS AND GLASS!!!!!
On a side not I FOUND MY BULLITT SCOOPS, SAIL PANELS AND GLASS!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
