Aiiight, time for pics of the drop.
#37
Thats higher now than my car was stock. I say take the springs out and cut at least a coil out of them and make sure they are installed in the right spots. This last pic you posted only looks low because you are making a hard turn shifting the weight of the car to the drivers side where the pic was snapped...
Last edited by yellowstang99; 02-09-2009 at 10:55 AM.
#39
Yes, definitely check installation first. If all else fails you can start cutting but that is last resort if installation is correct and you don't want to order different springs. I cut my eibach sportlines 1/2 coil in the front to get the look I want. What springs are on the car?
#46
I don't think even AM would take them back after they have been installed on a vehicle, but it's worth a try.
#48
When I lowered mine we did before and after measurments and the car was higher after the "drop" than it was stock but thats because I had 9 year old springs. After a week or so the new springs settled and I was about .5 lower than before which was about an inch down from what I imagine it was when it came out of the factory so give them a chance
#55
First off if you got polyurethane iso's they will be higher than the stock rubber ones. I would take the iso's out due to the fact they are there only to stop squeaks. 2nd are you sure you lined the pigtails on the bottom of the spring correctly i.e is the fronts down in the spring cup groove on the control arm and is the rear pigtails facing the right way? My Eibachs dropped my car atleast 2" and my Ford racing C springs dropped my 02 atleast 1.5". It looks like you got drag launch springs. There is something definately wrong yes springs do settle after a few days but those are just not going to. Other than that your car looks great man
#59
Bahaha nice Pcola. Well, the problem is def working itself out. The front dropped another 5/8's of an inch and another half inch in the back since the pics. I took out the front isos and I'll do the backs later
#60
Cool, take some new pics when you get it figured out. Are you taking the upper and lower isolators out??? I would..