Modular 4.6L Tech For all your 1996-2005+ 2V, 3V, and 4V modular motor needs.

P0190 FRP Sensor Signal Low

Thread Tools
 
Search this Thread
 
  #1  
Old 05-25-2008, 06:25 PM
BubbastanGT's Avatar
Member
Thread Starter
Join Date: May 2007
Posts: 90
Default P0190 FRP Sensor Signal Low

Just started to get this error code. Anyone have any suggestions how to correct this? Spark plugs possibly be a culprit?
 
  #2  
Old 05-25-2008, 07:36 PM
skylark's Avatar
Senior Member
Join Date: May 2008
Posts: 136
Default

Originally Posted by BubbastanGT
Just started to get this error code. Anyone have any suggestions how to correct this? Spark plugs possibly be a culprit?
Nope, the spark plugs have no idea what the fuel pressure is. The fuel rail on the drivers side has a sensor with a wire harness clipped to it and that is the sensor that is bad here. You could try testing the pressure in the rails on the passenger side with a gauge and hook it to the valve under the black cap but likely the sensor. I have a spare if you need to buy a good one at a better price than your local dealer but that is were I would start.
 
  #3  
Old 05-26-2008, 05:10 PM
BubbastanGT's Avatar
Member
Thread Starter
Join Date: May 2007
Posts: 90
Default

Skylark, thanks for the help buddy.
 
  #4  
Old 05-27-2008, 08:09 PM
BubbastanGT's Avatar
Member
Thread Starter
Join Date: May 2007
Posts: 90
Default

I got around to changing the plugs today and checked all my hoses for a possible leak. The grommet or rubber seal on one of the pieces to the CAI was pretty bad. I think this is the Intake Air sensor? Yes? no? I took some tape and sealed it shut and went for a quick spin. She was back to her ole throughbred self again. I dont know what the part is called its right after the mass air meter. Plugs werent that bad for my noobie self.
 
  #5  
Old 05-28-2008, 08:52 AM
BubbastanGT's Avatar
Member
Thread Starter
Join Date: May 2007
Posts: 90
Default

Damn it, went for a ride today and got the code again. So I am looking to replace the Fuel Rail Pressure Sensor?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nick03stang
General Tech Forum
16
05-07-2008 12:10 PM
Xcessiv
Modular 4.6L Tech
3
05-07-2007 12:52 PM
serum114
Modular 4.6L Tech
6
07-21-2005 10:27 PM
RedSilver88
Modular 4.6L Tech
6
06-12-2005 08:55 AM
MineralGT
General Tech Forum
10
04-20-2005 05:30 AM



Quick Reply: P0190 FRP Sensor Signal Low



All times are GMT -7. The time now is 04:05 AM.