Modular 4.6L Tech For all your 1996-2005+ 2V, 3V, and 4V modular motor needs.

Question

Thread Tools
 
Search this Thread
 
Old Jan 16, 2008 | 02:56 AM
  #1  
TJeffer3's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2005
Posts: 245
From: Tx
Default Question

Ok I have 2001 GT. I noticed that I have a slight tappin noise coming from the engine. I hear when the car is at idle, but can't here it during acceleration. I was wonder if I should run a heavier oil in my car right now I use 5w 20. I live in texas so cold weather is not and issue. Also if it was pulley going bad would it be making a tappin noise?
 
Old Jan 18, 2008 | 08:12 PM
  #2  
TUFF 4.6's Avatar
"Just Add Foot"
Joined: Dec 2007
Posts: 2,250
From: Richmond Va.
Default

I would try a 10w-30 syn. like Royal Purple or Mobil 1 and a FL820s oil filter. If you want to elimiate the pullies just pop the belt off and start the motor. Good Luck
 
Old Jan 18, 2008 | 08:57 PM
  #3  
officer4c13's Avatar
corrections
Joined: Jan 2008
Posts: 198
From: wa
Default

its hard to say with out hearing it. it could be a # of things. i would get it looked at incase it is internal i wouldnt take the chance.
 
Old Jan 19, 2008 | 06:15 PM
  #4  
TJeffer3's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2005
Posts: 245
From: Tx
Default

Originally Posted by officer4c13
its hard to say with out hearing it. it could be a # of things. i would get it looked at incase it is internal i wouldnt take the chance.
Yeah Im going to get it checked this week for an exhaust leak. But the guy at the muffler shop said it sounded it like it was coming from the bellhousing. So I'm going to take it to a place that does transimission work to be looked at.
 
Old Jan 20, 2008 | 09:22 AM
  #5  
TUFF 4.6's Avatar
"Just Add Foot"
Joined: Dec 2007
Posts: 2,250
From: Richmond Va.
Default

Do you have a 5 speed ? It may be the throwout bearing.
 
Old Jan 20, 2008 | 12:42 PM
  #6  
TJeffer3's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2005
Posts: 245
From: Tx
Default

Originally Posted by TUFF 4.6
Do you have a 5 speed ? It may be the throwout bearing.
no i have an automatic with a shift kit installed about 8 months ago.
 




All times are GMT -7. The time now is 04:05 AM.