Modular 4.6L Tech For all your 1996-2005+ 2V, 3V, and 4V modular motor needs.

0-60 time

Thread Tools
 
Search this Thread
 
  #1  
Old 05-08-2005 | 11:21 AM
witestang's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2005
Posts: 15
Default 0-60 time

I took my 03 Gt to the track for the first time this week. Everyone said my 0-60 time was way off. I was at 2.3 every time i ran. What should it be, and how do i improve it? I have an automatic transmission by the way.
 
  #2  
Old 05-08-2005 | 12:38 PM
USMCstang's Avatar
Secretary of Defense
Joined: Apr 2005
Posts: 355
From: Akron, OH...5 Mins from Summit Racing
Default

lol, I think you mean your "60 foot time". If you went 0-60 in 2.3 seconds, you'd have a hell of a beast on your hands.

My 98, automatic, on street tires, with stock gears, and never so much as having the valve covers off, does consistent 2.1-2.2's. A 03 should be able to rip-off a 1.9-2.1, depending on your traction and weight. There really isn't much to launcing auto's. When the third yellow light lights up, punch it. Simple as that. I put my left foot on the brake. When I launch mine, I simultaneously let off the brake and hit the accelerator. If you use one foot, your car starts to roll the second you take your foot off of the brake pedal, starting the timer, it prolly takes at least a tenth of a second to get it over to the gas and on the floor. Try that, you should gain a little...the rest is all traction and weight.
 
  #3  
Old 05-08-2005 | 07:38 PM
2000 STEEDA's Avatar
Senior Member
Joined: Sep 2004
Posts: 326
From: Baton Rouge
Default

lol, no crap. If you were pullin 2.4 0 to 60mph times you would be driving an F18. lol

BUT, just like stated above, just punch it on that yellow and you should be fine. You might need to get some stickier tires if you are spinning really bad.
 
  #4  
Old 05-08-2005 | 09:17 PM
Blue02GT's Avatar
Ex Mini Smack King
Joined: Nov 2004
Posts: 868
From: St. Louis
Default

I never ran my automatic with stock gears, the best I ever got out of the stock tires on 3.73's was 2.00.
I ran the rear tires at 18 - 20 psi.
 
  #5  
Old 05-11-2005 | 02:17 PM
Blue03gt's Avatar
Stoplight Assassin
Joined: May 2005
Posts: 64
From: East Palo Alto, Ca
Default

first time at the track in my 03 i ran 2.4 60 foots.... :angry3:
 
  #6  
Old 05-17-2005 | 09:04 AM
ponygirl74's Avatar
Junior Member
Joined: May 2005
Posts: 21
Default

I went to the track for the first time last weekend and my best 60 ft time was 2.1-- my tires were spinning too much at first. I just played around with what rpms to launch at. Really need to get under 2 seconds to break under 9 seconds for the 1/8 mile.
 
  #7  
Old 05-17-2005 | 09:29 AM
TayWolf55's Avatar
Senior Member
Joined: Sep 2004
Posts: 597
From: Ozark, MO
Default

I've only ran my car at the track a few times during one test and tune night and I didnt do so hot.

With a crappy 2.22 60 foot I did break into the 13s at 13.95 @ 98.81

I dont think thats bad at all for a k&n filter and o/r h pipe. :glasses10
 
  #8  
Old 05-20-2005 | 08:46 PM
gtnumber2's Avatar
Senior Member
Joined: Dec 2004
Posts: 289
Default

practice, with the auto you will get consistant and do better, good luck
 
  #9  
Old 05-22-2005 | 03:42 AM
dilo2001gt's Avatar
Senior Member
Joined: Nov 2004
Posts: 106
Default

Originally Posted by TayWolf55
I've only ran my car at the track a few times during one test and tune night and I didnt do so hot.

With a crappy 2.22 60 foot I did break into the 13s at 13.95 @ 98.81

I dont think thats bad at all for a k&n filter and o/r h pipe. :glasses10

what performance mods do you have that allow you to run a 13.5?
 
  #10  
Old 05-23-2005 | 01:26 AM
Blue03gt's Avatar
Stoplight Assassin
Joined: May 2005
Posts: 64
From: East Palo Alto, Ca
Default

:icon_scra it says it all in the quote... k&n and o/r h-pipe... and its not 13.5 ... its 13.9...
 
  #11  
Old 05-23-2005 | 01:52 PM
dom's Avatar
dom
whos gonna ban me next?
Joined: Apr 2005
Posts: 1,268
From: baltimore, MD
Default

a few times i ran 13.3 with a 2.0 60foot. long long ago
 
  #12  
Old 05-23-2005 | 03:26 PM
RedSilver88's Avatar
Member
Joined: Sep 2004
Posts: 35
Default

Originally Posted by Blue03gt
first time at the track in my 03 i ran 2.4 60 foots.... :angry3:
Ha same here, my first run ever was a 15.9!!! :BangHead:
 
  #13  
Old 05-24-2005 | 09:14 AM
fallstar's Avatar
Senior Member
Joined: Dec 2004
Posts: 111
Default

I'm thinking some lower control arms, steeda adjustable rear sway bar, better tires at low psi (like 16-20 in the rear tires), and quick reaction time and you should be on your way.
 
  #14  
Old 05-24-2005 | 02:26 PM
dom's Avatar
dom
whos gonna ban me next?
Joined: Apr 2005
Posts: 1,268
From: baltimore, MD
Default

lower control arms, and bfg or MT drag radials would help significantly. however, the stock converter only allows a launch off a low idle. you will need a looser converter to cut any impressive 60' times. the best 60' i ever got on stock converter was 2.0. and i didnt spin tires once
 
  #15  
Old 05-24-2005 | 05:35 PM
brucespot's Avatar
Senior Member
Joined: Apr 2005
Posts: 128
Default

What do you think my 2004 5 speed should do as far as 60 ft. times and the speed and et? I got 4.10s a diablo sport tune a k&n air and flomasters? I am going to run it but I live in upstate ny and it has to get better weather.
thanks... oh the 1/4 mile .
 
  #16  
Old 05-24-2005 | 08:29 PM
spike_africa's Avatar
Administrator
Joined: Sep 2004
Posts: 11,974
From: Orlando,Florida
Default

60" is all in the driver, so anywhere form awsome 1.9's all the way to well however ****ty the person is at launching. as for times being as it sounds like your first time i'l give you a 14.3@99
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeremy
Pictures
12
11-03-2009 05:41 PM
BabyStang
The Lounge
25
12-08-2004 11:50 PM
spike_africa
Modular 4.6L Tech
11
12-08-2004 08:14 AM
Jeremy
The Lounge
5
11-27-2004 07:56 PM
venom
The Lounge
13
11-13-2004 08:29 PM




All times are GMT -7. The time now is 10:44 PM.