Modular 4.6L Tech For all your 1996-2005+ 2V, 3V, and 4V modular motor needs.

Need Help

Thread Tools
 
Search this Thread
 
  #1  
Old 08-24-2006, 02:21 PM
98StangGT's Avatar
Junior Member
Thread Starter
Join Date: Aug 2006
Posts: 10
Default Need Help

My car is not sounding or feeling to good ideling, i tryed seafoam threw the pcv hose to the intake, didnt really help, and when Im driving my car jerks alot only when I give it throttle, what do yall think I should do?? - Trey
 
  #2  
Old 08-24-2006, 02:52 PM
PureStang's Avatar
Senior Member
Join Date: Jul 2005
Location: Downingtown/West Chester, PA
Posts: 5,796
Default

check you spark plugs...running that seafoam stuff can foul up ur plugs...also..check you IAC and ur MAF
 
  #3  
Old 08-24-2006, 03:04 PM
98StangGT's Avatar
Junior Member
Thread Starter
Join Date: Aug 2006
Posts: 10
Default

will a bad IAC make your car run bad? because I checked my plugs and they are good, and how do I know if I need a new IAC or MAF?
 
  #4  
Old 08-24-2006, 04:30 PM
Saleen S330's Avatar
Banned
Join Date: Jan 2006
Location: Sumter, SC
Posts: 900
Default

Just spray some electrical cleaner on the maf and some carb cleaner on the IAC, clean them off really good. And becareful of the wire element in the mass, touchy. IF that doesn't work, have to figure out what it could be.
Can you check your fuel pressure and tell us what it says?
 
  #5  
Old 08-24-2006, 06:04 PM
98StangGT's Avatar
Junior Member
Thread Starter
Join Date: Aug 2006
Posts: 10
Default

I will try to clean the mass , and IAC, but how do i check my fuel pressure?
 
  #6  
Old 08-25-2006, 06:20 AM
Saleen S330's Avatar
Banned
Join Date: Jan 2006
Location: Sumter, SC
Posts: 900
Default

You just need a fuel guage that screws onto the shrader valve, on the driver side fuel rail at the front of the car. screw it on there. see what the psi is and rev it some
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dewman2004
General Tech Forum
4
08-07-2006 08:12 PM
66pony
V6 Tech Forums
18
04-22-2006 06:35 PM
trickedoutstangg
The Lounge
13
06-30-2005 09:51 PM



Quick Reply: Need Help



All times are GMT -7. The time now is 12:50 AM.