where will i be at
#1
where will i be at
Well i am 100% stock besides the borla exhaust it comes wit tom going to order a accufab throttle body 75mm, accufab plenum, and jlt ram air intake. Are these good choices or is their better on the market. is the combo ok and do u think i will see any difference. has any one ever start wit these mods and ran it want to see where i would be at. thanks
#3
Gears would be first if it can fit your budget but someone will have to put them in for you. but what your ordering will be a great start and you can do it yourself, less money out. those JLT's are sick with the 4in tube. my friend has one on his GT, you could probably suck a squirrel up if you don't watch out..lol..
Probably looking at about 15-20HP on that setup. you will probably feel it more on the top end, little on the bottom end.
Probably looking at about 15-20HP on that setup. you will probably feel it more on the top end, little on the bottom end.
#4
you will be at within 15hp of your car when it was bone stock.
If you want to sink money into your car, buy an X-Cal2 and a set of 3.73's. Those are mods that'll always be good and useful and you'll feel them all the time. The X-Cal will recalibrate your speedo and allow you to tune your car for better efficiency and a little bit more power.
If you want to sink money into your car, buy an X-Cal2 and a set of 3.73's. Those are mods that'll always be good and useful and you'll feel them all the time. The X-Cal will recalibrate your speedo and allow you to tune your car for better efficiency and a little bit more power.
#7
Originally Posted by spike_africa
if its a real saleen they come with gears allready, 3.73's if i remember correctly.
#8
is there any way i could check on what gears i really so have. ok well after hearing good thing about my setup going to put the order in but is there anything i should know about the install and is every thing come with every thing to install it aslo any lil tricks about installing this or is pretty cut and dry.
#10
Originally Posted by s281 saleen #230
is there any way i could check on what gears i really so have. ok well after hearing good thing about my setup going to put the order in but is there anything i should know about the install and is every thing come with every thing to install it aslo any lil tricks about installing this or is pretty cut and dry.
info@saleen.com
www.saleen.com for any emails or contact numbers or saleen parts
Also it's pretty cut and dry on the install. It comes with everything to install, just need to supply the handtools and your good to go. If your not to familiar with the underhood, You can take pics of the front, top, and both sides of the area so when you put the new pieces on, you can reference that if you forget where a hose or connector goes. helps alot.
#11
Originally Posted by s281 saleen #230
oh one more ? where is the cheapest place to order the parts that would be a big help to.
Also is the mustangboards is what you type for a discount?
that or mustangboard.