J-mod installtion cost.
#1
J-mod installtion cost.
I was calling around to get quotes on work to be done to my tranny. I called this one place and they wanted $425 in labor just to install a tranny cooler and the J-mod speperator plate.
Please tell me you think this is way to high? I guess my search shall continue theres no way im paying $425 just in labor. If thats the case im not doing the J-mod.
Please tell me you think this is way to high? I guess my search shall continue theres no way im paying $425 just in labor. If thats the case im not doing the J-mod.
#2
I was calling around to get quotes on work to be done to my tranny. I called this one place and they wanted $425 in labor just to install a tranny cooler and the J-mod speperator plate.
Please tell me you think this is way to high? I guess my search shall continue theres no way im paying $425 just in labor. If thats the case im not doing the J-mod.
Please tell me you think this is way to high? I guess my search shall continue theres no way im paying $425 just in labor. If thats the case im not doing the J-mod.
Yeah... you can do it yourself for about 8 bucks.
EDIT: well, the jmkod at least, dunno about the tranny cooler. Shouldnt need a tranny cooler for a J-Mod, J-mod restores the tranny to its origional engineered specs.
#3
I was told to get the tranny cooler and do it while i was down there. I guess ill continue to call around and get some quotes.
#5
first i off i dont have the equipment, such as a floor jack etc. other wise i would. I just need to find someone that has the stuff to help me out with it.
#6
Installing a tranny cooler has nothing to do with being under the tranny. Only thing you might want to do is remove the front bumper. That price is crazy, maybe they just dont want to do the J Mod stuff.
#7
I was suggested to go to this place since he did amazing work. but what i later found out is that he's fairly expensive. So i shall continue my search.
#8
Well.....
if i were you i would go out abd spend $150 on a good 3 ton Floorjack. Then spend anther 50 on some good Jack Stands.
BAM,
1) you juust saved yourself $200 bucks,
2) You now have a damn good floor jack which is a VERY important tool.
3) you got a set of jackstands
4) you can now do the jmod.
if i were you i would go out abd spend $150 on a good 3 ton Floorjack. Then spend anther 50 on some good Jack Stands.
BAM,
1) you juust saved yourself $200 bucks,
2) You now have a damn good floor jack which is a VERY important tool.
3) you got a set of jackstands
4) you can now do the jmod.
#9
Well.....
if i were you i would go out abd spend $150 on a good 3 ton Floorjack. Then spend anther 50 on some good Jack Stands.
BAM,
1) you juust saved yourself $200 bucks,
2) You now have a damn good floor jack which is a VERY important tool.
3) you got a set of jackstands
4) you can now do the jmod.
if i were you i would go out abd spend $150 on a good 3 ton Floorjack. Then spend anther 50 on some good Jack Stands.
BAM,
1) you juust saved yourself $200 bucks,
2) You now have a damn good floor jack which is a VERY important tool.
3) you got a set of jackstands
4) you can now do the jmod.
#10
Well.....
if i were you i would go out abd spend $150 on a good 3 ton Floorjack. Then spend anther 50 on some good Jack Stands.
BAM,
1) you juust saved yourself $200 bucks,
2) You now have a damn good floor jack which is a VERY important tool.
3) you got a set of jackstands
4) you can now do the jmod.
if i were you i would go out abd spend $150 on a good 3 ton Floorjack. Then spend anther 50 on some good Jack Stands.
BAM,
1) you juust saved yourself $200 bucks,
2) You now have a damn good floor jack which is a VERY important tool.
3) you got a set of jackstands
4) you can now do the jmod.
Thread
Thread Starter
Forum
Replies
Last Post
Blue Thunder
Show, Shine, and Tunes!
8
02-06-2005 07:18 PM