some of my interior pieces or starting to vibrate especially my doors. i can replace the center console pieeces. But when i close the doors it sounds like the panels arent fully attached or something. Any Advice?

 

I hate to have to say this but .... IT's A FORD!!!!! - but we lov em anyways

 

Your door panels may have been off previously and may have not been put on correctly. Make sure they are on tight and correctly. My car doesnt rattle one bit.

 

Dum-dum works well, I also put some 3m double stick tape ( the stuff with foam on one side) behind my center airvents to keep the squeekies away. Works well. At 45-55mph would rattle like mad...now I only hear the LM1. My 99 had a few rattles also, dum-dum and 3m solved all those as well, if I could only keep the rear from squeeking on bumps?

 

well if you two center vents are vibrating and making noise like mine where, there is a tsb on them and if your car is still in warrenty they'll replace them for free

 

As far as your center bezel and shifter bezel.....you don't need to replace them.....just go to home depot or a store like it and get some 1/4" foam weather strip tape. Pop off both bezel's and line the foam tape around it and then re-install the bezels....I did this to mine about 6 months ago and no more noise coming from that area.

The problem I have now are the vents under the windshield wipers are making a "chirping" noise when I hit about 75mph....I originally thought it was my shaker, but it's the the vent. Probably nothing some double sided tape can't fix.

 

i have the same problembs w/ my doors....and my bezel...i know how to fix them but im too lazy (fixing them by the previoulsy stated)

but my question is how the hell do i get my E-break button to stop vibrating!!!!!!! it rattles from 1500-3000....and it the exhaust that does it too..grrrr

 

so i can just get foam weather strip tape to solve the door problems too. Just pop the doors off and line it with the tape