Wheel spacers
#1
Wheel spacers
I'm in search of anyone who has 1" wheel spacers on the back and can shoot a pic and post. I think with the spacer on, it will look funny between the wheel and rotor, in others words, look like it has a LONG hub on the rotor. Thanks for any pics.
#3
Depending on what wheels you have or put on it, you might see the
"hub look that you are speaking of. But like Lances pics shows, you cant see or tell that he has the spacers on there.
The spacers are usually the same diameter as the hub of the rotor and would not protrude past the outer mounting surface.
"hub look that you are speaking of. But like Lances pics shows, you cant see or tell that he has the spacers on there.
The spacers are usually the same diameter as the hub of the rotor and would not protrude past the outer mounting surface.
#4
Thanks for the pics, can you see them up close? I know if you look directly at the wheels and are looking for them you may be able but what about just at the wheel? Again thanks. Also sorry if this sounds goofy. I have 18x9 25mm offset with 6inch bs wheels and 275/35/18 tires coming and would like to add the inch spacers to completely get rid of the TUCKED look. I just don't want to see three inches of GAP before the wheels. My rear brakes are a little dif than most (13 inch rotors and larger calps) this is why I just didn't use dd. I added pics of my rotots and area I'm concered about so you can see what I'm thinking...maybe?
#5
Thread
Thread Starter
Forum
Replies
Last Post