Modular 4.6L Tech For all your 1996-2005+ 2V, 3V, and 4V modular motor needs.

Weird Humming Noise

Thread Tools
 
Search this Thread
 
Old Jan 8, 2012 | 01:03 PM
  #1  
Silver35thGT's Avatar
Thread Starter
|
Member
Joined: Apr 2011
Posts: 38
From: Riverview, Fl
Default Weird Humming Noise

Hey guys,

For a little while now my car has been making a loud humming noise coming from the engine/transmission.
The car would randomly increase RPMs from idle to like 1300/1400 and would stay for a little. Then suddenly drop to like 300 or 400 then catch itself and shoot back up to 1300.
Half the time the car will shut off when it does this.
When this is not happening everythiung runs perfect.
But when the humming happens I have a loss of power and the car feels... Jumpy under acceleration.
Was told alternator and it was going out. So New alternator, belt and battery. Noise still happens.

I have a video of the incar when it happens:
http://www.youtube.com/watch?v=EbAhc...vDZr2FVJ38fFzQ
(Video was before new alternator, ect.)

Only engine mod is a K&N CAI, and I run 93.
I had put the factory intake back on and same thing happens, so its not that for sure.

Other facts: 131K miles, 5 Speed V8.

Any advice would be helpful.


Thanks, Kurt
 

Last edited by Silver35thGT; Jan 8, 2012 at 01:07 PM.
Old Jan 9, 2012 | 11:00 AM
  #2  
Steeda97's Avatar
banzai
Joined: Apr 2007
Posts: 4,546
From: South Jersey
Default

vac leak? IAC?
 
Old Jan 9, 2012 | 04:01 PM
  #3  
Silver35thGT's Avatar
Thread Starter
|
Member
Joined: Apr 2011
Posts: 38
From: Riverview, Fl
Default

Originally Posted by Steeda97
vac leak? IAC?
I have also been told these.
I don't know if I had posteed ealier, but under acceleration the promble becomes less auidable, as I have found out. Which is where the vac issues came from.

More suggetions are welcome untill I find out what the cause is. Just incase anyone is wounder I will post the cause where it is fix.

Thanks for the help Steeda97.


(Just incase anyone is woundering, I will post the cause when it's fixed.)
 

Last edited by Silver35thGT; Jan 9, 2012 at 04:03 PM.
Old Jan 9, 2012 | 07:37 PM
  #4  
TUFF 4.6's Avatar
"Just Add Foot"
Joined: Dec 2007
Posts: 2,250
From: Richmond Va.
Default

Thats pretty much "text book" bad idle air control valve. Try pulling it off and clean it with some WD 40. Spray it out real good with WD and then install it back on with the WD 40 still inside the IAC. If this does'nt work, replace it. Good Luck!
 
Old Jan 10, 2012 | 02:47 PM
  #5  
Silver35thGT's Avatar
Thread Starter
|
Member
Joined: Apr 2011
Posts: 38
From: Riverview, Fl
Default

Originally Posted by TUFF 4.6
Thats pretty much "text book" bad idle air control valve. Try pulling it off and clean it with some WD 40. Spray it out real good with WD and then install it back on with the WD 40 still inside the IAC. If this does'nt work, replace it. Good Luck!
Will do.
Thanks for your help!
 
Old Jan 20, 2012 | 09:46 AM
  #6  
horspla2000's Avatar
Senior Member
Joined: Aug 2008
Posts: 342
From: North central Ohio
Default

Clean with WD-40???? /
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
susheelover
V6 Tech Forums
1
Jun 27, 2015 02:25 PM
gjscott_uk
Modular 4.6L Tech
3
May 10, 2009 03:46 PM
istambay1217
V6 Tech Forums
2
Dec 11, 2005 02:57 PM
kirsch
General Tech Forum
1
Dec 3, 2005 11:02 AM
ColoradoStang
General Tech Forum
7
Jul 21, 2005 08:49 AM




All times are GMT -7. The time now is 12:07 AM.