2 5.4 shortblocks
Thread Starter
|
Senior Member
Joined: Apr 2009
Posts: 271
From: s.c
pics
here is the 2002
here is the 2000,its been sitting in my shop wrapped up,had rags soaked in oil stuffed in the cylinders
and i also have this guy also with forged 8 bolt crank $125.00 for both
and a forged 8 bolt crank journals need polished $50.00
here is the 2002
here is the 2000,its been sitting in my shop wrapped up,had rags soaked in oil stuffed in the cylinders
and i also have this guy also with forged 8 bolt crank $125.00 for both
and a forged 8 bolt crank journals need polished $50.00
Junior Member
Joined: Nov 2010
Posts: 21
From: Hickory, NC
5.4 block for sale
I might be interested in one of your 5.4 blocks. I am only interested in block only with main caps and bolts (i.e. dowls pins and side bolts). Probably only other piece would be rear main seal plate, timing cover, and spacer nut for oil pick up mounted to main cap. I have no need for crank, pistons, or rods because I am replacing all that with a forged rotating assembly. What years are the two blocks. I live in Hickory, NC so probably can drive to pick up. I also have a question. Do you know of any close machine shops that torque plate bore in northern SC or western NC. Thanks Lee
Thread Starter
|
Senior Member
Joined: Apr 2009
Posts: 271
From: s.c
I might be interested in one of your 5.4 blocks. I am only interested in block only with main caps and bolts (i.e. dowls pins and side bolts). Probably only other piece would be rear main seal plate, timing cover, and spacer nut for oil pick up mounted to main cap. I have no need for crank, pistons, or rods because I am replacing all that with a forged rotating assembly. What years are the two blocks. I live in Hickory, NC so probably can drive to pick up. I also have a question. Do you know of any close machine shops that torque plate bore in northern SC or western NC. Thanks Lee
Thread
Thread Starter
Forum
Replies
Last Post
