Drag Racing! Discussions on drag racing, using the tree and techniques for improving your performance at the track

Need Help!!!!

Thread Tools
 
Search this Thread
 
  #1  
Old 07-02-2006, 02:56 PM
BraggStang's Avatar
Senior Member
Thread Starter
Join Date: Feb 2006
Posts: 224
Default Need Help!!!!

Went to the track today. On the way home I see smoke coming from the rear of my car...I pull over and I see transmission fluid leaking all over the place. I get my car home and take a look and it is leaking from the rear of the transmission where the driveshaft goes into it. Is there a bearing there?? I need some help on this one. Thanks

Bragg
 
  #2  
Old 07-02-2006, 03:16 PM
BraggStang's Avatar
Senior Member
Thread Starter
Join Date: Feb 2006
Posts: 224
Default

I think it may be the tailshaft seal any ideas???
 
  #3  
Old 07-02-2006, 04:38 PM
Blk02stang's Avatar
I 8urvtec!!
Join Date: Mar 2005
Location: Va
Posts: 815
Default

There should be a seal there, your trans might have gotten hot and was just boiling the fluid out.
 
  #4  
Old 07-02-2006, 04:42 PM
BraggStang's Avatar
Senior Member
Thread Starter
Join Date: Feb 2006
Posts: 224
Default

Originally Posted by Blk02stang
There should be a seal there, your trans might have gotten hot and was just boiling the fluid out.
It did more then boil out. It was about 2 qts that came out. This sucks. I gotta take it to my tuner now and see what the hell is going on. I hope it is just the seal and doesn't cost me and arm and a leg.
 
  #5  
Old 07-02-2006, 05:17 PM
cuban3jumper's Avatar
Your local V6 Guy
Join Date: Jul 2005
Posts: 841
Default

Auto or 5-speed?
 
  #6  
Old 07-02-2006, 05:49 PM
PureStang's Avatar
Senior Member
Join Date: Jul 2005
Location: Downingtown/West Chester, PA
Posts: 5,796
Default

he's auto
 
  #7  
Old 07-02-2006, 06:32 PM
cuban3jumper's Avatar
Your local V6 Guy
Join Date: Jul 2005
Posts: 841
Default

Alrighty same thing happened to me. Do you have your line pressure turned up by any chance? Either way do not drive your car like that it's bad for the tranny hopefully it's just the seal that goes back there that's what I first thought it was unfortunatly I needed a whole new tranny.
 
  #8  
Old 07-02-2006, 08:49 PM
MattJ's Avatar
Senior Member
Join Date: Dec 2004
Posts: 10,237
Default

Theres a seal. You are gonna have to open up your rear end, pull axles, remove your tlock and gears, and remove driveshaft.
 
  #9  
Old 07-02-2006, 08:50 PM
MattJ's Avatar
Senior Member
Join Date: Dec 2004
Posts: 10,237
Default

I dont have the part number on hand but I got one from ford before I did my gears for like 7 bucks, so it cant be more than 12.
 
  #10  
Old 07-03-2006, 12:40 PM
BraggStang's Avatar
Senior Member
Thread Starter
Join Date: Feb 2006
Posts: 224
Default

Originally Posted by MattJ
I dont have the part number on hand but I got one from ford before I did my gears for like 7 bucks, so it cant be more than 12.
It is the seal near the front of the tranny...Where the driveshaft first goes in. The seal is comletely out. I have to take it in Thursday.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dewman2004
General Tech Forum
4
08-07-2006 08:12 PM
66pony
V6 Tech Forums
18
04-22-2006 06:35 PM
trickedoutstangg
The Lounge
13
06-30-2005 09:51 PM



Quick Reply: Need Help!!!!



All times are GMT -7. The time now is 07:11 AM.