Drag Racing! Discussions on drag racing, using the tree and techniques for improving your performance at the track

Powershifting and Sprayin Baby!!!

Thread Tools
 
Search this Thread
 
  #1  
Old 03-02-2006 | 02:29 AM
jeredan2003's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2004
Posts: 1,787
From: Murfreesboro, TN
Default Powershifting and Sprayin Baby!!!

I am heading to the track at the end of this month. I wanted to know if it would be OK for me to powershift?

When I usually powershift while N/A it bounces off the rev limiter alot. I want to powershift while im spraying too. I have the window switch so it cuts it off at 5800rpms. Would I ever get traction powershifting on street tires w/ spray at the track? what about with slicks?

Would all this hurt my tranny or clutch from just a couple passes down the track?

Also I will have prolly 4:10 gear soon.... maybe I can get it to stand the front end up off the line.
 
  #2  
Old 03-02-2006 | 02:47 AM
i love soccermoms's Avatar
Joined: Jul 2005
Posts: 505
Default

Originally Posted by jeredan2003
I am heading to the track at the end of this month. I wanted to know if it would be OK for me to powershift?

When I usually powershift while N/A it bounces off the rev limiter alot. I want to powershift while im spraying too. I have the window switch so it cuts it off at 5800rpms. Would I ever get traction powershifting on street tires w/ spray at the track? what about with slicks?

Would all this hurt my tranny or clutch from just a couple passes down the track?

Also I will have prolly 4:10 gear soon.... maybe I can get it to stand the front end up off the line.
i have 3.73's, if i powershift from 1st -2nd, and 2nd - 3rd, my tires break loose. so yeah, youll definatly lose traction with spray
 
  #3  
Old 03-02-2006 | 07:37 AM
csledd's Avatar
DSG!!!
Joined: Feb 2005
Posts: 3,159
From: Paducah, KY
Default

eww don't bounce it off the rev limiter lol i hate that noise. anyways I also powershift and the tires break lose for me also.. so i dont think it would be a fun trip with spray lol. if you do powershift just don't miss a gear
 
  #4  
Old 03-02-2006 | 07:45 AM
spike_africa's Avatar
Administrator
Joined: Sep 2004
Posts: 11,974
From: Orlando,Florida
Default

If you have a window switch it will be fine the nitrous will be out of the motor by the time you are gonna shift. I have my MSD setup where it cuts the spray off at 5,500rpms this is when i shift. I powershift every gear its fine. You just wanna make sure its low enough were the nitrous will be out of the motor. I would most likly pull it down to 5,600-5,700 rpms to make sure its out of the motor.

And you should powershift your car will run faster if you do fast enough and are a good driver. when i was stock i dropped 2tenths from power shifting alone. in the dead heat of summer over a year ago here it was a 100* day i was running 14.5s-14.4's @97 i only changed to powershifting and dropped it down to a 14.29@99 just from the power shifting when it was 100% stock. Just to give you an idea.
 
  #5  
Old 03-02-2006 | 07:52 AM
JayC's Avatar
Cage Fighter
Joined: Apr 2005
Posts: 225
From: Southern Indiana
Default

I don't power-shift on the nitrous. I let out of the throttle about half way and shift as quickly as possible. I could possible squeeze another tenth of two out of her by power-shifting....who knows. So far I haven't seen the need to power-shift on the nitrous, although I do power-shift on every N/A pass



Jay
 
  #6  
Old 03-02-2006 | 05:29 PM
GT4DUMMIES's Avatar
Senior Member
Joined: Feb 2006
Posts: 107
Default

jay what shot are you running?
 
  #7  
Old 03-03-2006 | 08:44 AM
sweat it's Avatar
Junior Member
Joined: May 2005
Posts: 18
Default

Originally Posted by JayC
I don't power-shift on the nitrous. I let out of the throttle about half way and shift as quickly as possible. I could possible squeeze another tenth of two out of her by power-shifting....who knows. So far I haven't seen the need to power-shift on the nitrous, although I do power-shift on every N/A pass



Jay
That's one sweet looking ride you have.
 
  #8  
Old 03-03-2006 | 10:32 AM
jeredan2003's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2004
Posts: 1,787
From: Murfreesboro, TN
Default

Originally Posted by JayC
I don't power-shift on the nitrous. I let out of the throttle about half way and shift as quickly as possible. I could possible squeeze another tenth of two out of her by power-shifting....who knows. So far I haven't seen the need to power-shift on the nitrous, although I do power-shift on every N/A pass



Jay
So your running a completely stock longblock with PI intake? Did you run a 11.50 on a 125 shot? Have you ran it on a 100 shot? Thats real fast times. Im hoping to get mine running that fast.
 
  #9  
Old 03-03-2006 | 11:52 AM
MachGT's Avatar
Senior Member
Joined: Jan 2005
Posts: 650
From: Iowa
Default

I wouldn't power shift with nitrous on street tires. that's just begging to slam into the wall.

wait till you at least have drag radials.
 
  #10  
Old 03-03-2006 | 12:06 PM
JayC's Avatar
Cage Fighter
Joined: Apr 2005
Posts: 225
From: Southern Indiana
Default

Originally Posted by jeredan2003
So your running a completely stock longblock with PI intake? Did you run a 11.50 on a 125 shot? Have you ran it on a 100 shot? Thats real fast times. Im hoping to get mine running that fast.

All stock longblock, stock exhaust manifolds, TrickFlow Plenum/BBK 75mm Tb (gained a whopping 5 rwhp on the dyno ),Densecharger, Steeda Pullies and that's it for the motor. My best on a 100 shot has been 11.67 @117 , so a little was gained by going to the 150 shot. I can't stress enough the importance of a good tune. I would suggest a SCT tune by Speedy Dyno on Owensboro, Ky.


Jay
 
  #11  
Old 03-03-2006 | 02:36 PM
jeredan2003's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2004
Posts: 1,787
From: Murfreesboro, TN
Default

Originally Posted by JayC
All stock longblock, stock exhaust manifolds, TrickFlow Plenum/BBK 75mm Tb (gained a whopping 5 rwhp on the dyno ),Densecharger, Steeda Pullies and that's it for the motor. My best on a 100 shot has been 11.67 @117 , so a little was gained by going to the 150 shot. I can't stress enough the importance of a good tune. I would suggest a SCT tune by Speedy Dyno on Owensboro, Ky.


Jay
How much would he charge me for a 3 tune chip?

I go to Delk cause there close to where I live and theyre cool guys but they have a bad rep for dyno tunes. One guy said he paid $700 for a dyno tune at Delk and he only gained like 15hp on spray.....

How much more power did you gain with your tune? I might really think about having him tune it. I havent even really sprayed it in over a month cause my car moves like its makin some beans so I dont wanna blow it up.

Damn 117mph is prolly 5mph more than a stock 03 cobra...... but I have the plate.....:shifty:
 
  #12  
Old 03-03-2006 | 02:53 PM
JayC's Avatar
Cage Fighter
Joined: Apr 2005
Posts: 225
From: Southern Indiana
Default

Originally Posted by jeredan2003
How much would he charge me for a 3 tune chip?

I go to Delk cause there close to where I live and theyre cool guys but they have a bad rep for dyno tunes. One guy said he paid $700 for a dyno tune at Delk and he only gained like 15hp on spray.....

How much more power did you gain with your tune? I might really think about having him tune it. I havent even really sprayed it in over a month cause my car moves like its makin some beans so I dont wanna blow it up.

Damn 117mph is prolly 5mph more than a stock 03 cobra...... but I have the plate.....:shifty:
I know the Delk folks also, but know nothing about their tuning, except they use Diablow.......enought said:censored:

I can't quote prices for them but please go to their site and inquire by e-mail. I would suggest a SCT Xcal-2 with 3 tunes, you don't have the "switch-on-the-fly" option of a chip but the user adjustability is well worth it.

As far a dyno numbers, I'm seen 379/480 on a 100 shot and 423/553 on the 150 shot. I can't tell you what I gained from the tune because I never ran the nitrous without one Good luck, are you heading to Beech Bend with the car?



Jay


Jay
 
  #13  
Old 03-03-2006 | 03:00 PM
jeredan2003's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2004
Posts: 1,787
From: Murfreesboro, TN
Default

Originally Posted by JayC
I know the Delk folks also, but know nothing about their tuning, except they use Diablow.......enought said:censored:

I can't quote prices for them but please go to their site and inquire by e-mail. I would suggest a SCT Xcal-2 with 3 tunes, you don't have the "switch-on-the-fly" option of a chip but the user adjustability is well worth it.

As far a dyno numbers, I'm seen 379/480 on a 100 shot and 423/553 on the 150 shot. I can't tell you what I gained from the tune because I never ran the nitrous without one Good luck, are you heading to Beech Bend with the car?



Jay


Jay
Yes definately soon. Maybe ill see you there. I cant wait to see what it runs now cause its running alot better than it was the last time I ran it. Plus now I have all the electronics for it except for the tune.
 
  #14  
Old 03-03-2006 | 03:03 PM
JayC's Avatar
Cage Fighter
Joined: Apr 2005
Posts: 225
From: Southern Indiana
Default

Originally Posted by jeredan2003
Yes definately soon. Maybe ill see you there. I cant wait to see what it runs now cause its running alot better than it was the last time I ran it. Plus now I have all the electronics for it except for the tune.
I should be going down there in a few weeks. Got a few little things I want to do to the car first:clap:



Jay
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
96gtstang
Drag Racing!
3
08-25-2006 11:49 PM
Badfish
Drag Racing!
37
09-01-2005 07:46 PM
tanuman
The Lounge
13
02-22-2005 05:22 PM
tanuman
Pictures
20
02-21-2005 07:36 PM
nanaki
Pictures
5
11-21-2004 11:19 PM




All times are GMT -7. The time now is 01:05 AM.