Mustang Boards

Mustang Boards (/)
-   Drag Racing! (https://mustangboards.com/drag-racing/)
-   -   Powershifting and Sprayin Baby!!! (https://mustangboards.com/drag-racing/10355-powershifting-sprayin-baby.html)

jeredan2003 03-02-2006 01:29 AM

Powershifting and Sprayin Baby!!!
 
I am heading to the track at the end of this month. I wanted to know if it would be OK for me to powershift?

When I usually powershift while N/A it bounces off the rev limiter alot. I want to powershift while im spraying too. I have the window switch so it cuts it off at 5800rpms. Would I ever get traction powershifting on street tires w/ spray at the track? what about with slicks?

Would all this hurt my tranny or clutch from just a couple passes down the track?

Also I will have prolly 4:10 gear soon.... maybe I can get it to stand the front end up off the line.

i love soccermoms 03-02-2006 01:47 AM


Originally Posted by jeredan2003
I am heading to the track at the end of this month. I wanted to know if it would be OK for me to powershift?

When I usually powershift while N/A it bounces off the rev limiter alot. I want to powershift while im spraying too. I have the window switch so it cuts it off at 5800rpms. Would I ever get traction powershifting on street tires w/ spray at the track? what about with slicks?

Would all this hurt my tranny or clutch from just a couple passes down the track?

Also I will have prolly 4:10 gear soon.... maybe I can get it to stand the front end up off the line.

i have 3.73's, if i powershift from 1st -2nd, and 2nd - 3rd, my tires break loose. so yeah, youll definatly lose traction with spray

csledd 03-02-2006 06:37 AM

eww don't bounce it off the rev limiter :( lol i hate that noise. anyways I also powershift and the tires break lose for me also.. so i dont think it would be a fun trip with spray lol. if you do powershift just don't miss a gear :(

spike_africa 03-02-2006 06:45 AM

If you have a window switch it will be fine the nitrous will be out of the motor by the time you are gonna shift. I have my MSD setup where it cuts the spray off at 5,500rpms this is when i shift. I powershift every gear its fine. You just wanna make sure its low enough were the nitrous will be out of the motor. I would most likly pull it down to 5,600-5,700 rpms to make sure its out of the motor.

And you should powershift your car will run faster if you do fast enough and are a good driver. when i was stock i dropped 2tenths from power shifting alone. in the dead heat of summer over a year ago here it was a 100* day i was running 14.5s-14.4's @97 i only changed to powershifting and dropped it down to a 14.29@99 just from the power shifting when it was 100% stock. Just to give you an idea.

JayC 03-02-2006 06:52 AM

I don't power-shift on the nitrous. I let out of the throttle about half way and shift as quickly as possible. I could possible squeeze another tenth of two out of her by power-shifting....who knows. So far I haven't seen the need to power-shift on the nitrous, although I do power-shift on every N/A pass:punk:



Jay

GT4DUMMIES 03-02-2006 04:29 PM

jay what shot are you running?

sweat it 03-03-2006 07:44 AM


Originally Posted by JayC
I don't power-shift on the nitrous. I let out of the throttle about half way and shift as quickly as possible. I could possible squeeze another tenth of two out of her by power-shifting....who knows. So far I haven't seen the need to power-shift on the nitrous, although I do power-shift on every N/A pass:punk:



Jay

That's one sweet looking ride you have.:beerchug:

jeredan2003 03-03-2006 09:32 AM


Originally Posted by JayC
I don't power-shift on the nitrous. I let out of the throttle about half way and shift as quickly as possible. I could possible squeeze another tenth of two out of her by power-shifting....who knows. So far I haven't seen the need to power-shift on the nitrous, although I do power-shift on every N/A pass:punk:



Jay

So your running a completely stock longblock with PI intake? Did you run a 11.50 on a 125 shot? Have you ran it on a 100 shot? Thats real fast times. Im hoping to get mine running that fast.

MachGT 03-03-2006 10:52 AM

I wouldn't power shift with nitrous on street tires. that's just begging to slam into the wall.

wait till you at least have drag radials.

JayC 03-03-2006 11:06 AM


Originally Posted by jeredan2003
So your running a completely stock longblock with PI intake? Did you run a 11.50 on a 125 shot? Have you ran it on a 100 shot? Thats real fast times. Im hoping to get mine running that fast.


All stock longblock, stock exhaust manifolds, TrickFlow Plenum/BBK 75mm Tb (gained a whopping 5 rwhp on the dyno:punk: ),Densecharger, Steeda Pullies and that's it for the motor. My best on a 100 shot has been 11.67 @117 , so a little was gained by going to the 150 shot. I can't stress enough the importance of a good tune. I would suggest a SCT tune by Speedy Dyno on Owensboro, Ky.:beerchug:


Jay

jeredan2003 03-03-2006 01:36 PM


Originally Posted by JayC
All stock longblock, stock exhaust manifolds, TrickFlow Plenum/BBK 75mm Tb (gained a whopping 5 rwhp on the dyno:punk: ),Densecharger, Steeda Pullies and that's it for the motor. My best on a 100 shot has been 11.67 @117 , so a little was gained by going to the 150 shot. I can't stress enough the importance of a good tune. I would suggest a SCT tune by Speedy Dyno on Owensboro, Ky.:beerchug:


Jay

How much would he charge me for a 3 tune chip?

I go to Delk cause there close to where I live and theyre cool guys but they have a bad rep for dyno tunes. One guy said he paid $700 for a dyno tune at Delk and he only gained like 15hp on spray.....

How much more power did you gain with your tune? I might really think about having him tune it. I havent even really sprayed it in over a month cause my car moves like its makin some beans so I dont wanna blow it up.

Damn 117mph is prolly 5mph more than a stock 03 cobra......:punk: but I have the plate.....:shifty:

JayC 03-03-2006 01:53 PM


Originally Posted by jeredan2003
How much would he charge me for a 3 tune chip?

I go to Delk cause there close to where I live and theyre cool guys but they have a bad rep for dyno tunes. One guy said he paid $700 for a dyno tune at Delk and he only gained like 15hp on spray.....

How much more power did you gain with your tune? I might really think about having him tune it. I havent even really sprayed it in over a month cause my car moves like its makin some beans so I dont wanna blow it up.

Damn 117mph is prolly 5mph more than a stock 03 cobra......:punk: but I have the plate.....:shifty:

I know the Delk folks also, but know nothing about their tuning, except they use Diablow.......enought said:censored:

I can't quote prices for them but please go to their site and inquire by e-mail. I would suggest a SCT Xcal-2 with 3 tunes, you don't have the "switch-on-the-fly" option of a chip but the user adjustability is well worth it.

As far a dyno numbers, I'm seen 379/480 on a 100 shot and 423/553 on the 150 shot. I can't tell you what I gained from the tune because I never ran the nitrous without one:beerchug: Good luck, are you heading to Beech Bend with the car?



Jay


Jay

jeredan2003 03-03-2006 02:00 PM


Originally Posted by JayC
I know the Delk folks also, but know nothing about their tuning, except they use Diablow.......enought said:censored:

I can't quote prices for them but please go to their site and inquire by e-mail. I would suggest a SCT Xcal-2 with 3 tunes, you don't have the "switch-on-the-fly" option of a chip but the user adjustability is well worth it.

As far a dyno numbers, I'm seen 379/480 on a 100 shot and 423/553 on the 150 shot. I can't tell you what I gained from the tune because I never ran the nitrous without one:beerchug: Good luck, are you heading to Beech Bend with the car?



Jay


Jay

Yes definately soon. Maybe ill see you there. I cant wait to see what it runs now cause its running alot better than it was the last time I ran it. Plus now I have all the electronics for it except for the tune.

JayC 03-03-2006 02:03 PM


Originally Posted by jeredan2003
Yes definately soon. Maybe ill see you there. I cant wait to see what it runs now cause its running alot better than it was the last time I ran it. Plus now I have all the electronics for it except for the tune.

I should be going down there in a few weeks. Got a few little things I want to do to the car first:clap:



Jay


All times are GMT -7. The time now is 12:34 PM.


© 2024 MH Sub I, LLC dba Internet Brands