5.0L Tech There's no replacement for displacement.

High Reving To Pull Off t5 trans

  #1  
Old 06-05-2011, 07:54 PM
94crazyhawse's Avatar
Junior Member
Thread Starter
Join Date: Mar 2011
Posts: 4
Default High Reving To Pull Off t5 trans

I recently put 3:73 gears in the rear of my 94 5.0 5speed i ran them for about 3 weeks perfectly with no problem i enjoyed the difference, now im having to rev up really high to pull off in every gear with a studder in low rpms in 4th, it feels like a automatic with no fluid in it, has anyone else had a similar problem if not the same.
 
  #2  
Old 06-05-2011, 07:54 PM
94crazyhawse's Avatar
Junior Member
Thread Starter
Join Date: Mar 2011
Posts: 4
Default

i noticed that i could put it in gear and come off the clutch and not press the gas and it wouldnt stall in fact it started pulling off, bought the car in feb never had any clutch problems or tranny problems til now
 
  #3  
Old 06-06-2011, 12:31 AM
08mustang_gt's Avatar
Senior Member
Join Date: Sep 2008
Location: Liberty, Missouri
Posts: 2,201
Default

Sounds more like something to do with the motor and intake/fuel system than the trans or rearend.

Try the typical things first (MAF, plugs, injectors). No codes being thrown yet?
 
  #4  
Old 06-06-2011, 10:01 AM
94crazyhawse's Avatar
Junior Member
Thread Starter
Join Date: Mar 2011
Posts: 4
Default

as far as the motor everything checks out fine, no codes or anything. I'm hearing that clutch glazing could be an issue, i put e3 spark plugs in a while back so i canceled that as a option
 
  #5  
Old 06-06-2011, 12:32 PM
TUFF 4.6's Avatar
"Just Add Foot"
Join Date: Dec 2007
Location: Richmond Va.
Posts: 2,250
Default

This sounds crazy, do smell anything getting hot? I think I would look into the gears being setup really really tight. This will act just like the brakes are dragging. I have seen this before with bad installs. It cooks everything in the rear.
 
  #6  
Old 06-07-2011, 09:34 AM
94crazyhawse's Avatar
Junior Member
Thread Starter
Join Date: Mar 2011
Posts: 4
Default

i put the gears in myself, this is the fifth time i've installed a set of gears im familiar with the clash so its all in correctly, i ****** the clutch out yesterday and it was done, the flex plate was fried and the flywheel was glazed and full of small cracks, in neutral the car rolls fine but yes it felt like the brakes were dragging. i stopped in the middle of the tear down, went and got myself 2 stitches down the back of my pinky lol so i will be placing it all later on.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MustangCJ7
General Tech Forum
4
11-25-2017 04:12 AM
PColav6
Videos
8
07-28-2008 08:59 PM
Calm like a bomb
V6 Tech Forums
4
06-01-2008 11:01 AM
zo6stalker
Modular 4.6L Tech
4
12-14-2005 08:12 PM
roushrider81
General Tech Forum
2
08-14-2005 06:29 AM


Thread Tools
Search this Thread
Quick Reply: High Reving To Pull Off t5 trans



All times are GMT -7. The time now is 08:12 AM.