5.0L Tech There's no replacement for displacement.

Ignition Problems

Thread Tools
 
Search this Thread
 
  #1  
Old 10-31-2004 | 09:03 PM
stangster8's Avatar
Thread Starter
|
Junior Member
Joined: Oct 2004
Posts: 1
From: Farmington,NM
Exclamation Ignition Problems

I have a 95 Mustang GT and I used to have a Jacobs Ignition in my stang. The Jacobs Ignition stopped working and I had to put the stock ignition back in. A few months later I put a Powerdyne Supercharger in my car with the 6 psi pulley. I have an upgraded my fuel pump to a holley forced induction in- tank fuel pump. In the last 6 months I have went through two stock ignition modules. Right now I can't start my car and I am almost positive that my ignition module is out again. Why am I going through ignition modules and what do I need to upgrade to solve my problem. Also sometime my car will die while I am going down the road and it will restart while it is rolling. Because I either dump the clutch or it just will restart it self. Thanks
 
  #2  
Old 11-01-2004 | 04:15 PM
eric95GT's Avatar
Junior Member
Joined: Nov 2004
Posts: 2
Default

Ive had a similar problem. I got a 95 GT too. My car was stalling while i was driving and then would start back up on it own. I had it looked at and it was my ignition module and my distributor. I guess this isnt much help to you but you have one more thing that it could be. later
 
  #3  
Old 11-03-2004 | 02:57 PM
spike_africa's Avatar
Administrator
Joined: Sep 2004
Posts: 11,974
From: Orlando,Florida
Default

sounds like bad rewiring when you got rid of the jacobs setup.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lutesjc
5.0L Tech
1
02-22-2005 06:29 PM
Stevoneo
Modular 4.6L Tech
2
02-04-2005 11:27 PM
Stevoneo
Modular 4.6L Tech
3
02-03-2005 11:48 PM
feerlss007
5.0L Tech
1
01-23-2005 03:04 PM
bgwillie
5.0L Tech
2
12-08-2004 03:46 PM




All times are GMT -7. The time now is 08:50 PM.