Borla or flow

Cheddarbob · 11-07-2006, 03:12 PM

ok early this year i asked if i should get rid of my stock y pipe, and go to a h pipe and add a flowmaster to the other flow master i already have. but now im having second thoughts. I was thinking to just get the Borla system instead or maybe mangaflow. the flowmaster i loud but i heard a clip of the borla system heard here http://www.mustangexhaust.com/forums...atid=59&page=1
and it sounds way better than a flowmaster on the v6

What do you guys think?

SnTBakosFinest · 11-07-2006, 03:13 PM

If I were you I'd go with Borla..

Cheddarbob · 11-07-2006, 03:21 PM

Quote:

Originally Posted by SnTBakosFinest

If I were you I'd go with Borla..

the whole system or just the mufflers

SnTBakosFinest · 11-07-2006, 04:00 PM

I'd go with a full borla system... that or bassani

In my opinion Bassani and Borla sound better.

11-07-2006, 09:52 PM

I really wish I had the time/ energy to go out and get a clip of my exhaust. I have Tru-Dual w/ Flowmaster mufflers, and I've never heard a better sounding 6'er w/o an upgraded cam..

Cheddarbob · 11-08-2006, 07:10 AM

yeah i like my flows but Borla is insane. i found the system from $700 to $1000
I think im going to take it to a shop have them make a custom H pipe and then ill decide what mufflers to put on. anyone think that would be cheeper?

mustangvsix · 11-08-2006, 07:30 PM

700 to 1000 is a lot to spend on a V6 exhuast system.

if you can get the borla mufflers for cheap, then just have the shop fab it up for you then i say go that route, otherwise go with something else

Cheddarbob · 11-08-2006, 09:54 PM

Quote:

Originally Posted by mustangvsix

700 to 1000 is a lot to spend on a V6 exhuast system.

if you can get the borla mufflers for cheap, then just have the shop fab it up for you then i say go that route, otherwise go with something else

yeah that way it would only cost me 500 with nice crome 3' tips

Grimmz · 11-09-2006, 07:26 AM

as much as I love Borla on v8's, don't waste your money on a V6 exhaust, if u want a nice exhaust go with either Spintech, Mac, or Magnaflow, they're relatively cheap and sound good on a V8. The spintech kit is 530, for dual side exhaust and u can install it yourself...

main point, don't waste your money, stick with cheaper good exhausts, rather then expensive... if you really want that sound ur guna have to get that V8, otherwise stick cheap and maybe get Longtube headers and a shorty H pipe from Mac...

11-09-2006, 12:41 PM

Grimmz?? WTH have you been?

Anyway.. I had a full custom exhaust, tru-dual, 2 1/2" Stainless tips, flowmasters etc... for like $350

Cheddarbob · 11-09-2006, 09:23 PM

Quote:

Originally Posted by Grimmz

as much as I love Borla on v8's, don't waste your money on a V6 exhaust, if u want a nice exhaust go with either Spintech, Mac, or Magnaflow, they're relatively cheap and sound good on a V8. The spintech kit is 530, for dual side exhaust and u can install it yourself...

main point, don't waste your money, stick with cheaper good exhausts, rather then expensive... if you really want that sound ur guna have to get that V8, otherwise stick cheap and maybe get Longtube headers and a shorty H pipe from Mac...

AHH dont take my hopes from me... but point taken

11-07-2006, 03:12 PM	#1 (permalink)
Cheddarbob Haul ass on regular gas Join Date: Oct 2006 Location: San Diego, CA/ Putney, VT Posts: 2,101	Borla or flow ok early this year i asked if i should get rid of my stock y pipe, and go to a h pipe and add a flowmaster to the other flow master i already have. but now im having second thoughts. I was thinking to just get the Borla system instead or maybe mangaflow. the flowmaster i loud but i heard a clip of the borla system heard here http://www.mustangexhaust.com/forums...atid=59&page=1 and it sounds way better than a flowmaster on the v6 What do you guys think? __________________ 2000 V6 mustang, K&N FIPK II, True Dual Flowmaster Super 44's, DiabloSport tuner, 9mm Stang wires, Smoked Headlights, Mach 1 chin spoiler, Mach 1 grille delete, smoked tail light tint,GT rear bumper,12in Rockford Fosgate Sub w/a 600 Watt Rockford Amp, Tinted windows 5% back 35% front. SOLD

11-08-2006, 07:10 AM	#6 (permalink)
Cheddarbob Haul ass on regular gas Join Date: Oct 2006 Location: San Diego, CA/ Putney, VT Posts: 2,101	yeah i like my flows but Borla is insane. i found the system from $700 to $1000 I think im going to take it to a shop have them make a custom H pipe and then ill decide what mufflers to put on. anyone think that would be cheeper? __________________ 2000 V6 mustang, K&N FIPK II, True Dual Flowmaster Super 44's, DiabloSport tuner, 9mm Stang wires, Smoked Headlights, Mach 1 chin spoiler, Mach 1 grille delete, smoked tail light tint,GT rear bumper,12in Rockford Fosgate Sub w/a 600 Watt Rockford Amp, Tinted windows 5% back 35% front. SOLD

11-08-2006, 07:30 PM	#7 (permalink)
mustangvsix 4 point 6 Join Date: Sep 2005 Location: Flagstaff, Az / Los Alamos, NM Posts: 2,447	700 to 1000 is a lot to spend on a V6 exhuast system. if you can get the borla mufflers for cheap, then just have the shop fab it up for you then i say go that route, otherwise go with something else __________________ 2001 True Blue Cobra Convertible 1 of 292 #935 built on 4/20/01

11-09-2006, 07:26 AM	#9 (permalink)
Grimmz Jack Touched Me...I Cried Join Date: Aug 2005 Location: Tallahassee, FL/ Gaithersburg, MD Posts: 3,751	as much as I love Borla on v8's, don't waste your money on a V6 exhaust, if u want a nice exhaust go with either Spintech, Mac, or Magnaflow, they're relatively cheap and sound good on a V8. The spintech kit is 530, for dual side exhaust and u can install it yourself... main point, don't waste your money, stick with cheaper good exhausts, rather then expensive... if you really want that sound ur guna have to get that V8, otherwise stick cheap and maybe get Longtube headers and a shorty H pipe from Mac... __________________ 2003 Manual V6 "ETHEL" My CarDomain::Updated 12/31/05:: Engine Start-Up, Rev,and Walk Around , Drive By 3.8 Mustang Forum Exhaust's DSG Registry #0032 Props to Slither for the Sig!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-07-2006, 03:13 PM	#2 (permalink)
SnTBakosFinest Nitrous Injected 3.8 Join Date: Oct 2006 Posts: 1,646	If I were you I'd go with Borla..

11-07-2006, 04:00 PM	#4 (permalink)
SnTBakosFinest Nitrous Injected 3.8 Join Date: Oct 2006 Posts: 1,646	I'd go with a full borla system... that or bassani In my opinion Bassani and Borla sound better.

11-07-2006, 09:52 PM	#5 (permalink)
wnracing Posts: n/a	I really wish I had the time/ energy to go out and get a clip of my exhaust. I have Tru-Dual w/ Flowmaster mufflers, and I've never heard a better sounding 6'er w/o an upgraded cam..

11-09-2006, 12:41 PM	#10 (permalink)
wnracing Posts: n/a	Grimmz?? WTH have you been? Anyway.. I had a full custom exhaust, tru-dual, 2 1/2" Stainless tips, flowmasters etc... for like $350

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Cam Pics 56k, go x-mas shopping	shad0ws	Pictures	15	12-02-2006 01:08 PM
IRL driver Paul dana dies	BrentK	The Lounge	8	03-27-2006 07:36 AM
Can anybody tell where I can find these?	state-of-the-bad-ass-art"	Pictures	25	08-15-2005 12:38 PM
MIL eliminators	GTmustang04	The Lounge	6	04-27-2005 01:54 PM