Tire and Wheel Talk! Have a question about what tires to use? Or, just share your experience about your own.

Need some opinions please

Thread Tools
 
Search this Thread
 
  #1  
Old 07-22-2007, 06:50 PM
Widowmaker[X]'s Avatar
Now in GT!
Thread Starter
Join Date: Jul 2007
Location: Levittown, PA
Posts: 123
Default Need some opinions please

Hey guys, I recently purchased a 2003 Mach 1 and am looking to put on some new shoes. The Mach 1 rims just dont do it for me.

I'd just like some opinions on this setup.

All 4 (obviously) Chrome Bullitts from American Muscle
17x9 fronts
Sumitomo High Performance HTR Z Tire (275/40-17)

17x10.5 DD rears
Sumitomo High Performance HTR Z Tires (315/35-17)

Does this sound like a good setup? Tire sizes sound ok and wont rub the fenders? Please post your opinions!

Thanks for your time...
 
  #3  
Old 07-22-2007, 09:18 PM
Dave04Mustang's Avatar
Banned
Join Date: Jul 2006
Location: San Marcos, TX
Posts: 2,950
Default

yep sizes look fine
 
  #4  
Old 07-23-2007, 05:42 AM
venom's Avatar
Super Moderator
Join Date: Sep 2004
Posts: 6,075
Default

Have you looked into Mach 1 deep dish wheels.
 
  #5  
Old 07-23-2007, 07:17 PM
yellowstang99's Avatar
35th Anniversary GT
Join Date: Feb 2006
Location: Evansville, IN
Posts: 637
Default

Sumitomo HTR Z's are junk. The HTR Z II's are better, but they don't have them sizes in the II's. I had that exact setup on my 17's with 315's and 275's. I only have a 250hp car and those tires won't hook for crap. They don't have rim guard either, so your rim sticks out a little from the tire. Just my opionion though, I'm sure others feel differently.
 
  #7  
Old 07-23-2007, 08:45 PM
machnjo's Avatar
Senior Member
Join Date: Apr 2006
Location: Austin, Texas
Posts: 1,085
Default

Howdy and welcome to the board and do you have any pics of your car. What color is it as well? Regardless, the chrome bullitts will look good on it for sure.

For tires, I'd seriously consider getting Goodyear Eagle F1 GSD3s. They come in the sizes your looking for and are great dry/wet handling street tires. Unfortunately, the are little bit more expensive, but well worth it.

I can personally attest to their capabilities. Long story short, I raced a tornado down I20 from Ft. Worth toward Sweetwater for about 3 miles in a torrential down pour doing around 90 while only about 15 feet from the back of an 18 wheeler's trailer. It was F'n crazy. The car never once wavered, nor did I loose control when we were slamming into pools of standing water. So, again, I say, they are well worth the upfront cost.

P.S. Check out http://www.mach1registry.org/forums/index.php they have alot of good info as well.
 
  #8  
Old 07-25-2007, 06:31 PM
Widowmaker[X]'s Avatar
Now in GT!
Thread Starter
Join Date: Jul 2007
Location: Levittown, PA
Posts: 123
Default

Thanks for your opinions guys!

As for the Mach, it is straight black (no stripe) I want to get the bullitts because there are a few other Mach1's in my area that I always see driving around, and I really want something to make my Mach pop :P

One more opinion regarding the tires...

Obviously, with the 9 front - 10.5 rear setup, ful tire rotation is impossible. Do you guys think that it is more practical to run four 17 x 9's, or is the DD look in the rear just to bad-*** not to have.

Thanks again! And I'll snap some pics soon!
 
  #9  
Old 07-25-2007, 06:41 PM
Widowmaker[X]'s Avatar
Now in GT!
Thread Starter
Join Date: Jul 2007
Location: Levittown, PA
Posts: 123
Default

Also, those of you who have ordered aftermarket wheels, where have you ordered from? Ive been to a couple sites (AM, AFS) and would like some advise on where to blow $1,200 :P
 
  #10  
Old 07-25-2007, 08:24 PM
2kids3pets's Avatar
williteverend
Join Date: Jul 2007
Posts: 68
Default

Got my 18" DD Chrome Bullitts from Tim @ http://www.volpaz.com/ ...really easy guy to deal with


And for tires I found eBay was my best bet...you can really price compare...picked up a set of 275/35-18...295/35-18 BFG KDWs cheap $800.00 shipped......the tread pattern is sick

 
  #12  
Old 07-25-2007, 08:53 PM
Widowmaker[X]'s Avatar
Now in GT!
Thread Starter
Join Date: Jul 2007
Location: Levittown, PA
Posts: 123
Default

2kids, did you get the pony centercaps with those? The site only states that you may not get the centercaps pictured (wtf?)

Have any of you had experience or heard about a site called cruzinconcepts? They have Bullitts at a fairly low price...

http://cruizinconceptswholesale.com/products.asp?cat=17
 
  #14  
Old 07-25-2007, 09:53 PM
machnjo's Avatar
Senior Member
Join Date: Apr 2006
Location: Austin, Texas
Posts: 1,085
Default

DDs on a mach are a must. They just don't have that "pop" your looking for unless they are DDs.
 
Attached Images
File Type: jpg
9-1_1_.jpg (105.6 KB, 12 views)
File Type: jpg
923Mach_B.jpg (73.5 KB, 11 views)
File Type: jpg
IMG_0346.JPG (93.0 KB, 12 views)
  #15  
Old 07-26-2007, 02:30 PM
2kids3pets's Avatar
williteverend
Join Date: Jul 2007
Posts: 68
Default

Originally Posted by Widowmaker[X]
2kids, did you get the pony centercaps with those? The site only states that you may not get the centercaps pictured (wtf?)

Have any of you had experience or heard about a site called cruzinconcepts? They have Bullitts at a fairly low price...

http://cruizinconceptswholesale.com/products.asp?cat=17
No I had to order those extra...all 4 $60.00 shipped...sorry never dealt with cruzinconcepts...I got the same R center caps with my wheels...a lot of internet sellers get there wheels from the same place...in this case http://www.wheelreplicas.com/ the price cruzinconcepts is charging is a bit more than I paid...but still a good deal

What ever you do DO NOT GET POLISHED you will be disappointed on how fast they lose their shine and the amount of work to keep them shinny is a major PITA...if you want shiny get chrome

Now I'm sure someone will come in here and say my polished ones are just fine but hear me now and believe me later...GET CHROME if you want shiny
 
  #16  
Old 07-26-2007, 05:54 PM
Widowmaker[X]'s Avatar
Now in GT!
Thread Starter
Join Date: Jul 2007
Location: Levittown, PA
Posts: 123
Default

haha dont worry about that. Its chrome or bust for me...

ah, so essentially, both sites are selling the same wheels, made by the same company, its just through their warehouse.

I appreciate the help!
 
  #17  
Old 07-29-2007, 03:32 AM
StormsGT's Avatar
1320 Number of the beast
Join Date: Sep 2004
Location: Hope IN
Posts: 1,158
Default

Its a great setup. You'll love it.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WNRacing
General Tech Forum
13
09-27-2010 08:21 AM
venom
Show, Shine, and Tunes!
15
06-29-2008 07:12 PM
GETNUTZ11
The Lounge
7
05-27-2007 02:54 PM
RyanGT04
General Tech Forum
4
05-01-2006 10:56 AM
MineralGT
The Lounge
2
07-17-2005 07:08 PM



Quick Reply: Need some opinions please



All times are GMT -7. The time now is 06:51 AM.