Bullitt suspension chime in

*venom* · 07-19-2006, 03:41 PM

I think we need to get to the bottom of this, I saw one today and the stance was nice. I have 2 pics below of real Bullitts can everyone who has these springs list what other parts were replaced and provide a pic.

WaterDR · 07-20-2006, 05:49 PM

Well, you have already seen mine. I switched everything out....springs, shocks, struts, and sway bars.....the entire kit was used.

*venom* · 07-21-2006, 05:47 AM

Heres what Randy said part #s should be http://www.mustangboards.com/the-par...t-springs.html , I have a bit more done on suspension but wondering how the drop will be. Since I have LT headers dont want a big drop but then again dont the front higher than the rear. Car is on a lift now so will have to wait untill they lower it, will keep you updated on how it goes.

jareds98gt · 07-25-2006, 10:17 AM

im gonna be installing my bullitt suspension this saturday, ill post some pics for ya.

jareds98gt · 07-30-2006, 12:58 AM

install is done. the rear is sitting nicely, but the front still needs to settle. i will get the pics up after they settle. very easy install and the car feels 10x better.

a lot less body roll, and tighter steering.

*venom* · 07-30-2006, 09:11 AM

If you can take some measurements of the gap between the wheel and fender lip now then after they settle to see by how much.

*madmatt* · 08-01-2006, 05:24 AM

The one thing I hear over and over is that the stance on a bullitt is COMPLETELY different than what the kit will give you on a GT.

spike_africa · 08-01-2006, 09:38 AM

i got almost a 1" drop in the rear but the front is only barly 3/4" down. I just wish the front was a hair lower. Oh well for 50bucks i still have good weight transfer so i cant complain.

07-20-2006, 05:49 PM	#2 (permalink)
WaterDR Administrator Join Date: Sep 2004 Posts: 6,363	Well, you have already seen mine. I switched everything out....springs, shocks, struts, and sway bars.....the entire kit was used. __________________ Black 2000 GT Vert: Novi-2000 with Intercooler (375rwhp @ 9 psi); Tune by Kauffmans; Roush 380R Body kit; Steeda Subframes; Steeda Strut Tower Support; Deep Dish Bullets; FRPP 4:10's; SCT 4 Position Chip with four custom tunes; Steeda CAI; C&L Pleum; BBK 75 TB; SLP Loudmouth; SLP Catted X-Pipe; Bullitt Suspension; UPR Conrol Arms; Focus Fuel Pump My Car My Email

07-21-2006, 05:47 AM	#3 (permalink)
venom Super Moderator Join Date: Sep 2004 Posts: 5,270	Heres what Randy said part #s should be http://www.mustangboards.com/the-par...t-springs.html , I have a bit more done on suspension but wondering how the drop will be. Since I have LT headers dont want a big drop but then again dont the front higher than the rear. Car is on a lift now so will have to wait untill they lower it, will keep you updated on how it goes. __________________ http://www.mustangboards.com/mustang...500/ppuser/103

07-25-2006, 10:17 AM	#4 (permalink)
jareds98gt Senior Member Join Date: Jan 2006 Location: Nor Cal Posts: 306	im gonna be installing my bullitt suspension this saturday, ill post some pics for ya. __________________ Mods 03 PI 4.6 swap FRPP shorties, o/r X, Flowmaster 40's JLT Ram Air King Cobra clutch Bullitt suspension 255 whp - 275wtq FOR SALE!!!! $7000 OBO summer project: 97 Saleen- 04 pi motor, in the car

07-30-2006, 12:58 AM	#5 (permalink)
jareds98gt Senior Member Join Date: Jan 2006 Location: Nor Cal Posts: 306	install is done. the rear is sitting nicely, but the front still needs to settle. i will get the pics up after they settle. very easy install and the car feels 10x better. a lot less body roll, and tighter steering. __________________ Mods 03 PI 4.6 swap FRPP shorties, o/r X, Flowmaster 40's JLT Ram Air King Cobra clutch Bullitt suspension 255 whp - 275wtq FOR SALE!!!! $7000 OBO summer project: 97 Saleen- 04 pi motor, in the car

07-30-2006, 09:11 AM	#6 (permalink)
venom Super Moderator Join Date: Sep 2004 Posts: 5,270	If you can take some measurements of the gap between the wheel and fender lip now then after they settle to see by how much. __________________ http://www.mustangboards.com/mustang...500/ppuser/103

08-01-2006, 05:24 AM	#7 (permalink)
madmatt Traitor...lol Join Date: Sep 2004 Location: Lexington, SC Posts: 7,911	The one thing I hear over and over is that the stance on a bullitt is COMPLETELY different than what the kit will give you on a GT. __________________ RPMPlanets

08-01-2006, 09:38 AM	#8 (permalink)
spike_africa Administrator Join Date: Sep 2004 Location: Orlando,Florida Posts: 6,971	i got almost a 1" drop in the rear but the front is only barly 3/4" down. I just wish the front was a hair lower. Oh well for 50bucks i still have good weight transfer so i cant complain. __________________ Dustin 2002 GT Mustang 5-Speed Drag Radials,Sprayed,Powershifted WOOO HOOOO!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Whats the deal mt?	nbakid23	Order Status ?'s	6	06-27-2006 03:46 AM
charger	jareds98gt	The Lounge	6	05-18-2006 02:49 PM
vt stage two!	bikerjoe	General Tech Forum	3	02-17-2006 02:26 PM
taking wing off	03stangblue	General Tech Forum	7	08-04-2005 05:47 PM
Sportline springs...anyone have them ?	liv4him	The Lounge	1	05-07-2005 06:46 PM