Mustang Forums

Go Back   Mustang Forums > Mustang Madness > Power Adders

Power Adders Technical discussions for forced induction with nitrous and blowers.

Reply
 
Thread Tools Display Modes
Old 10-27-2005, 03:43 PM   #1 (permalink)
2k1bullitt
Junior Member
 
2k1bullitt's Avatar
 
Join Date: Oct 2005
Location: San Antonio
Posts: 1
Send a message via AIM to 2k1bullitt
Default Power out of little mods?

I have a 2001 Bullitt and I was looking for a couple of cheap power adding mods, anyone have suggestions for cheap mods?
2k1bullitt is offline   Reply With Quote
Old 10-27-2005, 04:35 PM   #2 (permalink)
WaterDR
Administrator
 
Join Date: Sep 2004
Posts: 6,363
Default

Welcome to the site. I am gonna move your thread. By "Power Adders" we mean turbos, nitrous, and super chargers.

Now, to your question. Cheap mods? Or, Cheap mods that actually work? What do you mean by cheap? I am going to assume you mean less than a $200, ok?

With that in mind, that does not leave you with much especially since you have a Bullitt. Us GT guys can spend money on the upper intake, but you already have the best one available. People kill for that Bullitt intake.

Basically, you are left with the following:

1 - K&N Filter: They cost about $40 and will net you about 2 - 3 hp.

2 - Cold Air Intake: This is a debatable mod. CAI's can be as cheap as $50 or as much as $300. On your car, if you spent about $100, you might get 5 - 8 hp.

3 - Under Drive Pullies: These cost about $200 for new ones, but they are easy to find used. Only get Steeda's or SLP's IMO. This is a proven mod that will net 5 - 10 hp

4 - O/R X Pipe: They are as cheap as $150 new and are good for 10 - 15 hp. Best bang for the buck mod. But, your car may not pass emissions. You can get catted X Pipes, but they cost more and you will get about the same gains.

5 - Used Chip: SCT Chips cost about $325 new. I have seen used ones for $150, but you will need to pay for a programmer to tune it (about $50). They are good for about 8-15 hp.

Well, that is about it as far as cheap mods go....that work that is.
__________________


Black 2000 GT Vert:
Novi-2000 with Intercooler (375rwhp @ 9 psi); Tune by Kauffmans; Roush 380R Body kit; Steeda Subframes; Steeda Strut Tower Support; Deep Dish Bullets; FRPP 4:10's; SCT 4 Position Chip with four custom tunes; Steeda CAI; C&L Pleum; BBK 75 TB; SLP Loudmouth; SLP Catted X-Pipe; Bullitt Suspension; UPR Conrol Arms; Focus Fuel Pump

My Car

My Email
WaterDR is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hello from Houston.....newb in the house!!! swingle007 New Members! 12 02-27-2006 05:59 PM
Newbie from florida Silver03GT New Members! 3 10-17-2005 04:50 PM
Stroking and Forging? yeayea0 General Tech Forum 7 09-08-2005 07:43 PM
my buddy GoZ The Lounge 7 05-02-2005 10:15 PM
VHT stage 2 cams? Joe Friday AmericanMuscle 0 05-02-2005 06:44 PM



Ad Management by RedTyger

SEO by vBSEO 3.0.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48